UniView

IPC6858SR-X22 - Security Camera UniView - Free user manual and instructions

Find the device manual for free IPC6858SR-X22 UniView in PDF.

📄 89 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice UniView IPC6858SR-X22 - page 2
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Security Camera
Brand UniView
Model IPC6858SR-X22
Resolution 2 MP (1920×1080)
Lens 2.8 mm fixed
IR Range Up to 30 m
Day/Night ICR auto switch
Video Compression H.265+/H.265/H.264+/H.264
Network Interface 1× RJ45 10/100M
Power Supply DC 12V / PoE (802.3af)
Power Consumption < 8 W
Ingress Protection IP67
Dimensions (W×H×D) 70×70×150 mm
Weight 0.5 kg
Operating Temperature -30°C to +60°C
Installation Wall or ceiling mount
Maintenance Clean lens with soft, dry cloth
Safety Use certified power supply; mount securely
Spare Parts Available through authorized dealers
Warranty 3 years limited

Frequently Asked Questions - IPC6858SR-X22 UniView

What is the default IP address of the UniView IPC6858SR-X22?
The default IP address is 192.168.1.10. You can access the camera via web browser using this address after connecting it to your network.
How do I reset the camera to factory defaults?
Press and hold the reset button on the camera for 10 seconds while the camera is powered on. The camera will reboot and restore factory settings.
Can the camera be used outdoors?
Yes, the camera has an IP67 rating, making it dust-tight and protected against temporary immersion in water. It is suitable for outdoor use.
What is the maximum SD card capacity supported?
The camera supports microSD card up to 256 GB. Insert the card into the slot on the bottom of the camera before mounting.
How do I enable motion detection?
Log into the camera’s web interface, go to Configuration > Events > Motion Detection, and enable it. You can draw detection areas and set sensitivity.
Does the camera support PoE?
Yes, the camera supports Power over Ethernet (PoE) 802.3af. You can power it using a PoE switch or injector.
What is the field of view of the lens?
With the 2.8 mm lens, the field of view is approximately 105° horizontal.
How can I view the camera remotely?
Use the UniView UMS software or the UVMS mobile app. Configure port forwarding or use P2P (via serial number) for remote access.
What is the best way to clean the camera?
Use a soft, dry cloth to gently wipe the lens and housing. Avoid using chemicals or abrasive materials to prevent damage.
How do I change the camera’s password?
Log in to the web interface, go to Configuration > System > Security > User Management, and update the password for the admin account.

User questions about IPC6858SR-X22 UniView

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Security Camera in PDF format for free! Find your manual IPC6858SR-X22 - UniView and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. IPC6858SR-X22 by UniView.

USER MANUAL IPC6858SR-X22 UniView

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : UniView

Model : IPC6858SR-X22

Category : Security Camera