WD-600 K2 US - Vacuum Cleaner Koblenz - Free user manual and instructions
Find the device manual for free WD-600 K2 US Koblenz in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wet/Dry Vacuum Cleaner |
| Model | WD-600 K2 US |
| Brand | Koblenz |
| Power Supply | 120 V, 60 Hz, 10 A |
| Motor Power | 5.5 HP (peak) |
| Tank Capacity | 6 gallons (23 liters) |
| Airflow | 120 CFM |
| Sealed Pressure | 65 inches of water lift |
| Filtration | Premium cloth filter (included) and foam sleeve for wet pickup |
| Dimensions (L x W x H) | 20 x 17 x 22 inches (50.8 x 43.2 x 55.9 cm) |
| Weight | 12.5 lbs (5.7 kg) |
| Cord Length | 15 ft (4.6 m) |
| Hose Length | 6 ft (1.8 m) |
| Duty Cycle | Continuous duty |
| Noise Level | ~75 dB |
| Blower Function | Yes |
| Wet Pickup | Yes |
| Dry Pickup | Yes |
| Accessories Included | Crevice tool, utility nozzle, wet nozzle, cartridge filter |
| Safety Features | Thermal overload protection; tank full shut-off |
| Maintenance | Clean/replace filter; empty tank after each use |
| Repairability | Consumer replaceable filters and hose; motor service by authorized center |
Frequently Asked Questions - WD-600 K2 US Koblenz
Can the Koblenz WD-600 K2 US pick up water?
Yes, it is a wet/dry vacuum. Use the foam sleeve filter for wet pickup and remove the cloth filter to prevent damage.
What type of filter does the WD-600 use?
It uses a reusable cloth filter for dry pickup and a foam sleeve for wet pickup. A cartridge filter is also included.
How do I clean the filter?
For the cloth filter, tap off dust or wash with mild soap and water, letting it dry completely before reuse. Foam sleeve can be rinsed and air-dried.
What is the tank capacity?
The tank capacity is 6 gallons (23 liters). Do not overfill; for liquids, stop when full to avoid motor damage.
Does the vacuum have a blower function?
Yes, it can be used as a blower by attaching the hose to the exhaust port.
What accessories are included?
It comes with a crevice tool, utility nozzle, wet nozzle, and a 6-foot hose.
How do I replace the cartridge filter?
Turn off and unplug the vacuum. Remove the tank lid, take out the old filter, and install a new one (Koblenz filter model available). Reassemble securely.
Why does the vacuum suddenly stop?
It may be due to thermal overload protection (unit too hot) or tank full shut-off for liquids. Allow the unit to cool or empty the tank, then restart.
Can I use the vacuum for fine dust?
For fine dust, use the cloth or cartridge filter. Avoid using the foam sleeve alone as it may not trap fine particles.
Where can I find replacement parts?
Replacement filters and hoses are available from Koblenz or authorized dealers. Check the user manual for part numbers.
User questions about WD-600 K2 US Koblenz
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Vacuum Cleaner in PDF format for free! Find your manual WD-600 K2 US - Koblenz and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WD-600 K2 US by Koblenz.