OH1399 - Heating N'oveen - Free user manual and instructions
Find the device manual for free OH1399 N'oveen in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | Fan Heater |
| Model | OH1399 |
| Brand | N'oveen |
| Power Output | 2000 W (high) / 1000 W (low) |
| Voltage | 220-240 V ~ 50/60 Hz |
| Heating Element | PTC ceramic |
| Dimensions (W x D x H) | 25 x 15 x 30 cm |
| Weight | 2.5 kg |
| Cord Length | 1.8 m |
| Thermostat | Adjustable thermostat |
| Modes | Fan only, Low heat, High heat |
| Oscillation | Yes, 70° wide |
| Overheat Protection | Automatic shut-off |
| Tip-Over Switch | Yes |
| Noise Level | 45 dB (low setting) |
| Filter Type | Washable dust filter |
| Cleaning | Unplug and wipe exterior with dry cloth; wash filter with water |
| Certifications | CE, RoHS |
| Included Accessories | User manual |
Frequently Asked Questions - OH1399 N'oveen
How do I turn on the N'oveen OH1399 heater?
Plug the heater into a mains socket, then turn the mode dial from OFF to either FAN (cool air), LOW HEAT (1000W), or HIGH HEAT (2000W). The thermostat dial can be adjusted to set the desired temperature.
What does the thermostat do?
The thermostat allows you to set a target room temperature. Once the room reaches that temperature, the heater will automatically cycle off and on to maintain it. Turn the dial clockwise to increase the temperature.
How to clean the filter?
Unplug the heater and wait for it to cool. Remove the filter cover (usually at the back), take out the filter, and wash it under lukewarm water. Let it dry completely before reinstalling. Clean the filter at least once a month.
Is the heater safe to leave unattended?
While the heater has overheat protection and a tip-over switch, it is recommended not to leave it unattended for long periods. Always place it on a stable, level surface away from flammable materials.
Why does the heater turn off by itself?
This could be due to the thermostat reaching the set temperature, or the overheat protection activating if the heater is covered or intake is blocked. Check for obstructions and ensure the filter is clean. If it persists, contact support.
Can I use the heater in a bathroom?
The N'oveen OH1399 is not rated for bathroom use unless it is a splash-proof model. Always check the IP rating; if not specified, keep it away from water and damp areas.
How do I use the oscillation function?
Press the oscillation button (if available) or rotate the heater head manually. Some models have a separate switch. Refer to the manual for exact location.
What are the dimensions and weight?
The heater measures approximately 25 x 15 x 30 cm (WxDxH) and weighs about 2.5 kg, making it compact and portable.
Can I use an extension cord?
It is not recommended to use an extension cord with high-power heaters. Plug the heater directly into a wall socket to avoid overheating and fire risk.
How to reset the heater after a safety shutdown?
Unplug the heater, wait 10-15 minutes for it to cool, check for blockages, clean the filter if needed, then plug it back in and turn it on. If it shuts down again, contact service.
User questions about OH1399 N'oveen
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Heating in PDF format for free! Find your manual OH1399 - N'oveen and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. OH1399 by N'oveen.
USER MANUAL OH1399 N'oveen
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : N'oveen
Model : OH1399
Category : Heating