Concerta M8 SP2 - Loudspeaker Revel - Free user manual and instructions
Find the device manual for free Concerta M8 SP2 Revel in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Floorstanding Loudspeaker |
| Model | Concerta M8 SP2 |
| Brand | Revel |
| Driver Configuration | 3-way: 1" tweeter, 5.25" midrange, 8" woofer |
| Frequency Response | 30 Hz - 20 kHz |
| Sensitivity | 90 dB (2.83V/1m) |
| Impedance | 6 ohms |
| Recommended Amplifier Power | 50 - 200 Watts RMS |
| Dimensions (H x W x D) | 44.1" x 9.8" x 13.6" (1120 x 250 x 345 mm) |
| Weight | 55.1 lbs (25 kg) |
| Finish Options | Black Ash, Cherry, Walnut |
| Grille | Magnetic cloth grille included |
| Placement | Free-standing on floor, away from walls |
| Power Handling | 150 Watts RMS, 300 Watts peak |
| Cabinet Material | MDF with internal bracing |
| Connectivity | Binding posts for speaker wire |
| Bi-Wiring/Bi-Amping | Yes with removable jumpers |
| Cleaning Instructions | Wipe with soft dry cloth; avoid liquids |
| Safety Features | Stable base, rubber feet; ensure secure placement |
| Spare Parts Availability | Contact Revel customer support |
Frequently Asked Questions - Concerta M8 SP2 Revel
What is the recommended placement for the Concerta M8 SP2?
Place the speakers at least 12 inches from the rear wall and 24 inches from side walls for optimal bass response. They should be angled slightly toward the listening position for best stereo imaging.
Can I bi-wire or bi-amp the Concerta M8 SP2?
Yes, the speaker has two sets of binding posts with removable jumpers. You can bi-wire by connecting separate cables to each set, or bi-amp by using two amplifiers. Ensure jumpers are removed for bi-amping.
What amplifier power is recommended?
Revel recommends amplifiers between 50 and 200 Watts RMS per channel at 6 ohms. The speaker is fairly efficient (90 dB), so it can work with moderate power, but a quality amplifier will reveal its full potential.
How should I clean the speakers?
Use a soft, dry microfiber cloth to dust the cabinet and grille. For stubborn marks, slightly dampen the cloth with water. Do not use any solvents, polishes, or abrasive cleaners.
Is there a break-in period for these speakers?
Yes, like many high-quality speakers, the Concerta M8 SP2 may require 50-100 hours of play at moderate volume to reach optimal performance. The sound will become more open and cohesive over time.
What is the impedance of the Concerta M8 SP2?
The nominal impedance is 6 ohms, so it is compatible with most receivers and amplifiers rated for 6 ohm loads. The minimum impedance may drop to 4 ohms at certain frequencies.
Can I use these speakers as part of a home theater system?
Absolutely. The Concerta M8 SP2 works well as front left/right speakers in a home theater setup. Revel offers matching center channels and surround speakers for a cohesive system.
What type of speaker wire should I use?
Use high-quality 14-gauge or 12-gauge speaker wire with banana plugs or bare wire. Ensure the wire length is equal for both speakers to maintain consistent impedance.
How do I attach the grille?
The grille is held in place by magnets embedded in the baffle. Simply align the grille with the front of the speaker and it will snap into place. Remove by gently pulling from the edges.
What should I do if the sound is distorted?
Check that the amplifier is not clipping (reduce volume). Ensure the speaker wires are securely connected and not shorted. Also verify that the speaker is placed on a stable surface and not obstructed.
User questions about Concerta M8 SP2 Revel
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual Concerta M8 SP2 - Revel and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Concerta M8 SP2 by Revel.