Digital Watchdog

MegaPix Flex DWC-PVX20WATX - Surveillance Camera Digital Watchdog - Free user manual and instructions

Find the device manual for free MegaPix Flex DWC-PVX20WATX Digital Watchdog in PDF.

📄 90 pages English EN ⬇ Download 💬 AI Question ❓ 10 questions ⚙️ Specs
Notice Digital Watchdog MegaPix Flex DWC-PVX20WATX - page 1
1 / 90
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Surveillance Camera
Brand Digital Watchdog
Model MegaPix Flex DWC-PVX20WATX
Image Sensor 1/2.8" Progressive Scan CMOS
Resolution 2 Megapixel (1920x1080)
Lens 2.8-12mm Varifocal, F1.4
Night Vision Up to 100ft IR range
Video Compression H.265 / H.264 / MJPEG
Power Supply PoE (802.3af) or 12V DC
Power Consumption 12W max
Dimensions 5.5" x 3.2" x 2.8" (140 x 81 x 71 mm)
Weight 1.5 lbs (0.68 kg)
Weatherproof Rating IP66
Operating Temperature -20°C to 60°C (-4°F to 140°F)
Storage MicroSD up to 128GB (optional)
Main Features Day/Night, WDR, Motion Detection, ONVIF Compatible
Cleaning Instructions Wipe with dry cloth. Do not use solvents.
Safety DC power adapter rated for indoor use only. PoE recommended.
Spare Parts Mounting kit and power adapter available separately.
Repairability Limited; contact manufacturer for service.
General Information Designed for indoor/outdoor use. Suitable for commercial and residential surveillance.

Frequently Asked Questions - MegaPix Flex DWC-PVX20WATX Digital Watchdog

How do I reset the camera to factory defaults?
Locate the reset button on the camera (usually near the Ethernet port). Press and hold for 10 seconds while power is on. The camera will reboot with factory settings.
What is the default IP address?
The default IP is 192.168.1.168. You can change it via the Digital Watchdog Config Tool software.
How can I access the camera remotely?
Ensure the camera is connected to a network with internet access. Use the DW IP Finder to locate the camera, then configure port forwarding on your router to access it via a web browser or the DW Mobile App.
What should I do if the camera is not powering on?
Check the PoE injector or switch first. If using 12V DC, verify the power adapter is plugged in and providing 12V. Also inspect the Ethernet cable for damage.
How do I update the firmware?
Download the latest firmware from the Digital Watchdog website. Access the camera's web interface, go to Maintenance > Firmware Upgrade, and upload the file. Do not power off during update.
What is the maximum recording resolution?
The camera supports up to 1920x1080 at 30 fps in H.265 mode.
Does the camera support audio?
Yes, the camera has a built-in microphone and a speaker output for two-way audio.
Can I use a microSD card for local storage?
Yes, insert a microSD card (up to 128GB) into the slot. Recording can be configured for continuous or event-based.
How far can the IR night vision see?
The IR LEDs provide effective illumination up to 100 feet (30 meters) in complete darkness.
What is the warranty period?
Digital Watchdog offers a 2-year warranty from the date of purchase. Contact support for warranty claims.

User questions about MegaPix Flex DWC-PVX20WATX Digital Watchdog

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Surveillance Camera in PDF format for free! Find your manual MegaPix Flex DWC-PVX20WATX - Digital Watchdog and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MegaPix Flex DWC-PVX20WATX by Digital Watchdog.

USER MANUAL MegaPix Flex DWC-PVX20WATX Digital Watchdog

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Digital Watchdog

Model : MegaPix Flex DWC-PVX20WATX

Category : Surveillance Camera