CH205HTODS - Heating Gasmate - Free user manual and instructions
Find the device manual for free CH205HTODS Gasmate in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Indoor Gas Heater |
| Model | CH205HTODS |
| Brand | Gasmate |
| Heating Type | Convection / Radiant |
| Fuel Type | Propane (LPG) |
| Power Output | 4.2 kW (14,300 BTU/h) |
| Dimensions (W x D x H) | 430 x 310 x 600 mm |
| Weight | 5.5 kg |
| Gas Consumption | 305 g/h |
| Ignition | Piezo electric |
| Safety Features | Tip-over switch, oxygen depletion sensor (ODS) |
| Control Type | Manual gas valve |
| Heating Area | Up to 50 m² |
| Noise Level | Low (no fan) |
| Material | Steel body, ceramic burner |
| Certification | AGA / NZ Gas Association |
| Usage | Indoor ventilated areas |
| Maintenance | Clean burner annually; check gas hose for leaks |
| Gas Cylinder Size | 4.5 kg or 9 kg |
| Warranty | 2 years (parts and labor) |
Frequently Asked Questions - CH205HTODS Gasmate
How do I ignite the Gasmate CH205HTODS heater?
Turn the gas valve to the 'Pilot' position, press and hold the control knob, and press the piezo igniter button repeatedly until the pilot flame ignites. Continue holding the knob for 30 seconds, then release and turn to desired heat setting.
What type of gas should I use?
Use propane (LPG) only. Do not use butane or natural gas. Ensure the gas cylinder is equipped with an approved regulator.
Why won't the heater stay lit?
Possible causes: thermocouple is faulty or not heated enough; gas supply is low; pilot orifice is blocked. Check gas cylinder level, clean pilot assembly, or replace thermocouple.
Can I use the heater indoors?
Yes, but only in well-ventilated areas. Do not use in bedrooms, bathrooms, or confined spaces. Always leave a door or window slightly open.
How often should I clean the heater?
Clean the burner and pilot assembly at least once a year. Wipe exterior with a damp cloth. Check gas hose for cracks or leaks annually.
What does the tip-over switch do?
The tip-over switch automatically shuts off the gas supply if the heater is knocked over, preventing gas leaks and fire hazards.
How do I know if the oxygen depletion sensor (ODS) is working?
The ODS will shut off the heater if oxygen levels drop too low. Test it by running the heater in a small room with doors closed; it should switch off within 15 minutes.
The heater smells gas when off. What should I do?
Immediately turn off the gas cylinder valve. Do not operate electrical switches. Ventilate the area. Check all connections with soapy water for bubbles. If leak persists, contact a gas technician.
Can I connect the heater to a natural gas line?
No, this model is designed for propane (LPG) only. Converting to natural gas requires a conversion kit and must be done by a certified professional.
What is the recommended clearance from combustible materials?
Keep at least 0.5 m from walls, furniture, curtains, and other combustibles. Leave at least 1 m clearance in front of the heater.
User questions about CH205HTODS Gasmate
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Heating in PDF format for free! Find your manual CH205HTODS - Gasmate and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CH205HTODS by Gasmate.
USER MANUAL CH205HTODS Gasmate
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Gasmate
Model : CH205HTODS
Category : Heating