DBAL-A3 - Uncategorized Steiner - Free user manual and instructions
Find the device manual for free DBAL-A3 Steiner in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Dual Beam Laser Aiming Device |
| Brand | Steiner |
| Model | DBAL-A3 |
| Dimensions (L x W x H) | 3.5 x 1.5 x 1.5 in (89 x 38 x 38 mm) |
| Weight | 6.2 oz (176 g) |
| Power Source | One CR123A Lithium Battery |
| Battery Life | Approximately 25 hours continuous use |
| Visible Red Laser | Output: 5 mW, Wavelength: 635 nm |
| Infrared Laser | Output: 20 mW, Wavelength: 830 nm |
| Infrared Illuminator | Output: 10 mW, Wavelength: 830 nm |
| Laser Class | Class 3R (visible), Class 1 (IR) |
| Waterproof Rating | IP67 (submersible up to 1 m for 30 min) |
| Material | Aluminum alloy with hard anodized finish |
| Mounting Interface | Picatinny rail (MIL-STD-1913) |
| Operating Temperature | -20°C to +50°C (-4°F to +122°F) |
| Warranty | 2 years limited warranty |
| Maintenance | Clean with soft cloth; avoid solvents; store dry |
| Safety Precautions | Avoid direct eye exposure; use applicable laser safety glasses |
Frequently Asked Questions - DBAL-A3 Steiner
How do I install the battery in the DBAL-A3?
To install the battery, rotate the battery cap counterclockwise to remove it. Insert a CR123A lithium battery with the positive terminal facing the cap. Reattach the cap and tighten securely.
What is the battery life of the DBAL-A3?
The DBAL-A3 provides approximately 25 hours of continuous use on a single CR123A battery under normal conditions.
Can the DBAL-A3 be mounted on any rifle?
Yes, the DBAL-A3 is designed to mount on any Picatinny rail (MIL-STD-1913) using the integrated clamp, making it compatible with most rifles, carbines, and shotguns.
How do I zero the laser on the DBAL-A3?
Use the provided windage and elevation screws on the rear of the device. Adjust with a compatible tool to align the laser to your point of aim at a desired distance (e.g., 25 meters).
What is the difference between visible and IR modes?
The visible red laser (635 nm) is for daylight or low-light use. The infrared laser and illuminator (830 nm) are only visible through night vision devices.
Is the DBAL-A3 waterproof?
Yes, it has an IP67 rating, meaning it is dust-tight and can be submerged in water up to 1 meter for 30 minutes.
How do I clean the DBAL-A3?
Use a soft, lint-free cloth to wipe the exterior. For the lenses, use a lens cleaning solution and microfiber cloth. Do not use abrasive solvents.
What safety precautions should I take when using the DBAL-A3?
Always avoid direct eye exposure to the laser. The visible laser is Class 3R and can cause eye injury. Use proper laser safety eyewear and never aim at people or animals.
Does the DBAL-A3 come with a remote switch?
Yes, the DBAL-A3 includes a remote pressure switch with a coiled cable for momentary activation, allowing hands-free operation.
Where can I find replacement parts or service?
Contact Steiner customer service or an authorized service center. Common parts like batteries and mounting screws are available from Steiner dealers.
User questions about DBAL-A3 Steiner
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual DBAL-A3 - Steiner and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DBAL-A3 by Steiner.
USER MANUAL DBAL-A3 Steiner
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Steiner
Model : DBAL-A3
Category : Uncategorized