IR-820SP - Microphone TOA - Free user manual and instructions
Find the device manual for free IR-820SP TOA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wired Handheld Microphone |
| Brand | TOA |
| Model | IR-820SP |
| Type | Dynamic |
| Polar Pattern | Cardioid |
| Frequency Response | 50 Hz - 15,000 Hz |
| Impedance | 600 ohms |
| Connector | XLR-3-32 (male) |
| Phantom Power Required | No |
| Dimensions | 45 mm diameter x 180 mm length |
| Weight | 250 g |
| Color | Black |
| Application | Speech, vocal performances, public address |
| Included Accessories | Microphone clip, windscreen, carrying case |
| Warranty | 2 years limited |
Frequently Asked Questions - IR-820SP TOA
What is the recommended distance from the mouth when using the IR-820SP microphone?
For optimal sound quality and to avoid popping sounds, keep the microphone 2-4 inches (5-10 cm) from your mouth. Adjust based on your vocal level.
Does the TOA IR-820SP require phantom power?
No, the IR-820SP is a dynamic microphone and does not require phantom power. It works with standard XLR inputs providing 48V or without.
What type of cable connector does the IR-820SP use?
It uses a standard 3-pin XLR male connector. A balanced XLR cable is recommended for best signal integrity.
Is the IR-820SP suitable for outdoor use?
Yes, it can be used outdoors, but avoid exposure to moisture and extreme temperatures. Use a windscreen to reduce wind noise.
How do I clean and maintain the IR-820SP microphone?
Wipe the exterior with a damp cloth and mild detergent. Do not submerge in water. Clean the grille gently with a soft brush to remove dust.
Can I replace the microphone capsule or other parts?
The capsule is not user-replaceable. For repairs, contact TOA authorized service centers. The XLR connector can be replaced by a qualified technician.
What is the polar pattern of the IR-820SP?
It has a cardioid polar pattern, which picks up sound from the front and rejects sound from the sides and rear, reducing feedback.
Is the IR-820SP compatible with all audio mixers?
Yes, it connects to any mixer with a balanced XLR input. It works with both low-impedance and high-impedance inputs.
What is the frequency response of the TOA IR-820SP?
The frequency response is 50 Hz to 15,000 Hz, suitable for speech and vocal applications with clear reproduction.
How can I reduce handling noise with this microphone?
Use the included microphone clip on a stand rather than hand-holding, or hold the microphone firmly but gently to minimize vibration noise.
User questions about IR-820SP TOA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Microphone in PDF format for free! Find your manual IR-820SP - TOA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. IR-820SP by TOA.
USER MANUAL IR-820SP TOA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : TOA
Model : IR-820SP
Category : Microphone