elara.6 - DJ Equipment Union Audio - Free user manual and instructions
Find the device manual for free elara.6 Union Audio in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | DJ Mixer |
| Model | elara.6 |
| Brand | Union Audio |
| Channels | 6 |
| Dimensions (Width x Depth x Height) | 48.2 cm x 30.5 cm x 8.9 cm |
| Weight | 5.2 kg |
| Power Supply | 100-240V AC, 50/60 Hz |
| Power Consumption | 25 W |
| Audio Inputs | 6x Line (RCA), 2x Phono (RCA), 2x Mic (XLR/Jack) |
| Audio Outputs | 2x Master (XLR), 1x Booth (Jack), 1x Record (RCA) |
| Headphone Output | 1x 1/4" Jack |
| EQ per Channel | 3-band (High, Mid, Low) |
| Crossfader | Replaceable, adjustable curve |
| Effects | Built-in effects (delay, reverb, filter) |
| USB Connectivity | 1x USB B for MIDI/audio interface |
| Sampling Rate | 44.1 kHz / 48 kHz |
| Frequency Response | 20 Hz - 20 kHz (±0.5 dB) |
| Signal-to-Noise Ratio | >90 dB |
| Total Harmonic Distortion | <0.01% |
| Protection | Overload and short-circuit protection |
| Cleaning | Wipe with a soft, dry cloth. Do not use solvents. |
| Spare Parts Availability | Contact Union Audio support for replacement parts |
Frequently Asked Questions - elara.6 Union Audio
How do I connect my turntables to the elara.6?
Use the Phono inputs (RCA) on the back panel. Ensure your turntable has a built-in preamp or connect via a separate phono preamp. For line-level sources, use the Line inputs.
Can I use the elara.6 as a MIDI controller?
Yes, the elara.6 features a USB B port that allows MIDI control and audio streaming to a computer. Install the appropriate drivers from the Union Audio website.
What is the maximum number of channels I can use simultaneously?
The elara.6 has 6 channels, including line and phono inputs. You can use all six simultaneously, but note that phono inputs are best for turntables only.
How do I adjust the crossfader curve?
Locate the Crossfader Curve adjustment knob (often near the crossfader). Turn clockwise for a sharper cut, counterclockwise for a smoother blend. Some models may have a switch for different curve types.
What should I do if the mixer does not power on?
First, check the power cable and connection. Ensure the power switch is on. If still not working, try a different power outlet. If the issue persists, contact Union Audio support.
Can I replace the crossfader myself?
Yes, the crossfader is designed to be user-replaceable. Purchase a compatible crossfader from Union Audio or an authorized dealer, and follow the instructions in the manual for installation.
How do I clean the mixer?
Use a soft, dry cloth to wipe the surface. For stubborn dirt, lightly dampen the cloth with water. Do not use alcohol, solvents, or abrasive cleaners as they may damage the finish.
What are the recommended operating conditions?
Operate the mixer in a well-ventilated area with temperature between 5°C and 35°C. Avoid exposure to direct sunlight, moisture, and dust. Keep away from heat sources.
Does the elara.6 have built-in effects?
Yes, it includes built-in effects such as delay, reverb, and filter. You can assign effects to individual channels or the master output using the effects section on the front panel.
How do I update the firmware?
Download the latest firmware from the Union Audio website. Connect the mixer to your computer via USB and use the provided firmware update tool. Follow the on-screen instructions carefully.
User questions about elara.6 Union Audio
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your DJ Equipment in PDF format for free! Find your manual elara.6 - Union Audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. elara.6 by Union Audio.
USER MANUAL elara.6 Union Audio
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Union Audio
Model : elara.6
Category : DJ Equipment