70836 - Glue gun Draper - Free user manual and instructions
Find the device manual for free 70836 Draper in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Glue Gun |
| Brand | Draper |
| Model | 70836 |
| Power Supply | 100-240 V AC, 50/60 Hz |
| Power Consumption | 100 W |
| Glue Stick Diameter | 11 mm |
| Glue Stick Length | 200 mm |
| Operating Temperature | 160-200 °C |
| Warm-Up Time | Approx. 3 minutes |
| Nozzle Type | Metal, precision tip |
| Stand | Built-in, foldable |
| Dimensions (L x W x H) | 200 x 100 x 50 mm |
| Weight | 300 g |
| Cable Length | 1.5 m |
| Material | Plastic body, metal nozzle |
| Safety Features | Built-in stand for stable placement, heat-resistant nozzle cover |
| Maintenance | Clean nozzle while hot with a cloth; store in a dry place |
| Replacement Parts | Replaceable glue nozzle available |
| Intended Use | Crafts, DIY repairs, home projects |
Frequently Asked Questions - 70836 Draper
How do I insert a glue stick into the Draper 70836 glue gun?
Ensure the gun is unplugged and cold. Insert the glue stick into the rear inlet until it stops. Do not force it.
What type of glue sticks should I use?
Use standard 11 mm diameter glue sticks. Avoid using sticks with a larger diameter as they may jam.
How long does it take to heat up?
The glue gun reaches operating temperature in approximately 3 minutes. The nozzle will become hot.
Can I use the glue gun on vertical surfaces?
Yes, the glue gun can be used on vertical surfaces, but the glue may drip. Apply glue quickly and press firmly.
How do I clean the nozzle?
Unplug the gun and allow it to cool slightly. Wipe the nozzle with a cloth while it is still warm. Do not use water.
What should I do if the glue gun stops dispensing glue?
Check if the glue stick is empty or jammed. If jammed, unplug and let cool, then remove the stick and trim the tip.
Is it safe to leave the glue gun unattended?
No, never leave a hot glue gun unattended. Always place it on its stand when not in use and unplug after use.
Can I use the glue gun for electronics?
Yes, but ensure the glue is non-conductive. Standard hot glue is suitable for low-voltage electronics.
How do I replace the nozzle?
Unplug and let cool. Wearing gloves, unscrew the nozzle carefully. Screw on a new nozzle and tighten.
What is the warranty period?
Draper typically offers a 2-year warranty. Check your purchase documentation for specific terms.
User questions about 70836 Draper
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Glue gun in PDF format for free! Find your manual 70836 - Draper and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 70836 by Draper.
USER MANUAL 70836 Draper
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Draper
Model : 70836
Category : Glue gun