Structural Concepts

Fusion GLDSV4R - Uncategorized Structural Concepts - Free user manual and instructions

Find the device manual for free Fusion GLDSV4R Structural Concepts in PDF.

📄 37 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Structural Concepts Fusion GLDSV4R - page 3
Pick your language and provide your email: we'll send you a specifically translated version.
Product TypeRefrigerated Merchandiser
BrandStructural Concepts
ModelFusion GLDSV4R
Dimensions (W x D x H)48" x 30" x 78"
WeightApproximately 300 lbs
Power Supply115V, 60Hz, 15A
Temperature Range33°F to 41°F (1°C to 5°C)
Defrost TypeAutomatic electric defrost
LightingLED interior lighting
Number of Doors4 sliding glass doors
Shelves4 adjustable chrome wire shelves
RefrigerantR-290 (propane) hydrocarbon
Thermostat TypeElectronic digital thermostat
Interior MaterialStainless steel liner
Exterior FinishWhite or stainless steel, depending on variant
Locking MechanismKeyed door locks
Castors4” swivel castors with two brakes
Cooling SystemForced air circulation with evaporator fan
Energy ConsumptionApproximately 6.5 kWh per day
CleanabilityRemovable grille and washable condenser filter
Safety FeaturesDoor alarms, leveling legs, and anti-tip bracket
Spare Parts AvailabilityReplaceable shelves, door gaskets, LED lamps, castors, and thermostats
User Manual IncludedYes (37 pages PDF)

Frequently Asked Questions - Fusion GLDSV4R Structural Concepts

What is the recommended temperature setting for storing perishable items?
Set the digital thermostat to 34°F to 38°F (1°C to 3°C) for optimal food safety and shelf life.
How often should I clean the condenser coil?
Clean the condenser coil every 3 months using a soft brush or vacuum to prevent overheating.
What type of refrigerant does this unit use?
The Fusion GLDSV4R uses R-290 (propane), a hydrocarbon refrigerant. Ensure proper ventilation during service.
Can I adjust the shelf height?
Yes, shelves are adjustable at 1-inch increments. Lift the front of the shelf, pull forward, and reposition.
How do I replace a door gasket?
Locate the gasket retaining strip, remove screws, pull out the old gasket, and press the new one into place before tightening screws.
What should I do if the unit is not cooling?
Check power supply and ensure the condenser coil is clean. Verify the thermostat setting. If still not cooling, contact a qualified technician.
Is the interior light replaceable?
Yes, the LED light is replaceable. Order part number LED-FUSION-4R from Structural Concepts.
How do I level the unit?
Adjust the leveling legs under the frame. Use a wrench to rotate each leg until the unit is stable and plumb.
Can I use extension cords with this appliance?
No, do not use extension cords. The unit requires a dedicated circuit rated for 15 amps.
Where can I find the warranty information?
Warranty details are in the user manual, page 3-5. Standard warranty is 3 years parts and labor for refrigeration components.

User questions about Fusion GLDSV4R Structural Concepts

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Uncategorized in PDF format for free! Find your manual Fusion GLDSV4R - Structural Concepts and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Fusion GLDSV4R by Structural Concepts.

USER MANUAL Fusion GLDSV4R Structural Concepts

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Structural Concepts

Model : Fusion GLDSV4R

Category : Uncategorized