SW42DA - Router Blustream - Free user manual and instructions
Find the device manual for free SW42DA Blustream in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Video Router (HDMI Matrix Switch) |
| Brand | Blustream |
| Model | SW42DA |
| Inputs | 4 x HDMI |
| Outputs | 2 x HDMI |
| Max Resolution | 4K@60Hz (4:4:4) |
| HDCP Support | HDCP 2.2 |
| Audio Support | LPCM 7.1, Dolby TrueHD, DTS-HD Master Audio |
| Control Methods | IR, RS-232, LAN (TCP/IP) |
| Power Supply | 5V DC, 2A |
| Dimensions (W x D x H) | 220 mm x 100 mm x 30 mm |
| Weight | 0.5 kg |
| Mounting | Rack mountable (optional kit) |
| EDID Management | Built-in EDID auto-switching |
| HDMI Cable Distance | Up to 15m at 4K |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Humidity | 10% to 85% (non-condensing) |
| Safety Certifications | CE, FCC, RoHS |
| Maintenance | Clean with dry, lint-free cloth |
| Security | Keep away from moisture and direct sunlight |
| Repairability | No user-serviceable parts; contact Blustream support |
Frequently Asked Questions - SW42DA Blustream
How do I set up the Blustream SW42DA router?
Connect your HDMI sources to inputs 1-4 and your displays to outputs 1-2. Power the unit with the included 5V DC adapter. Use IR remote or RS-232 to switch sources.
What is the maximum resolution supported?
The SW42DA supports 4K@60Hz with 4:4:4 chroma subsampling and HDCP 2.2.
Can I control the SW42DA via IP?
Yes, it supports LAN control via TCP/IP. You can integrate it with control systems like Crestron, AMX, or use simple telnet commands.
Why is my display not showing an image?
Check that the source and display are powered on and the HDMI cables are securely connected. Verify HDCP compatibility: some older displays may not support HDCP 2.2. Try power cycling the unit.
How do I update the firmware?
Firmware updates are available from Blustream's website. Connect the SW42DA via LAN, use the web interface to upload the firmware file, and follow on-screen instructions.
What is the EDID management feature?
EDID management allows the router to negotiate the best video and audio format between sources and displays. The SW42DA has built-in EDID auto-switching to ensure compatibility.
Can I cascade multiple SW42DA units?
Yes, you can connect multiple units by linking outputs to inputs. However, note that each hop may introduce a slight delay. Use high-quality HDMI cables for longer runs.
Is the SW42DA compatible with Dolby Atmos?
Yes, it supports Dolby TrueHD and DTS-HD Master Audio, so Dolby Atmos metadata can be passed through to a compatible AV receiver.
What is the power consumption of the SW42DA?
The unit consumes a maximum of 10 watts. It uses an external 5V/2A DC power supply.
How do I reset the SW42DA to factory defaults?
Press and hold the reset button (located on the rear panel) for 10 seconds using a paperclip. The unit will reboot with default settings.
User questions about SW42DA Blustream
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual SW42DA - Blustream and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SW42DA by Blustream.
USER MANUAL SW42DA Blustream
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Blustream
Model : SW42DA
Category : Router