Draper

45927 - String Trimmer Draper - Free user manual and instructions

Find the device manual for free 45927 Draper in PDF.

📄 20 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Draper 45927 - page 4
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type String Trimmer
Brand Draper
Model 45927
Power Source Electric (mains powered)
Power 300 W
Cutting Width 30 cm (12 in)
Cutting Line Diameter 1.2 mm
Spool Capacity 3 m
Noise Level 96 dB(A)
Vibration Level 2.5 m/s²
Weight 2.5 kg
Handle Type D-loop
Safety Features Protective guard and double-switch operation
Cable Length 10 m
Dimensions (L x W x H) 120 cm x 25 cm x 25 cm
Color Green/Black
Recommended Use Garden trimming, lawn edging
Maintenance Required Regular cleaning, line replacement
Included Accessories Spool with line, guard assembly, instruction manual
Warranty 2 years

Frequently Asked Questions - 45927 Draper

How do I replace the cutting line on the Draper 45927?
First, disconnect the power. Remove the spool cover, take out the old spool, and wind new line onto the spool following the directional arrows. Reinsert the spool and secure the cover.
How do I start the trimmer?
Ensure the safety switch is engaged, then press and hold the trigger. Some models require pressing a button first. Always keep hands away from the cutting head.
What safety precautions should I take?
Wear protective eyewear and gloves. Avoid loose clothing. Keep bystanders at least 15 m away. Never operate near wet grass or in rain.
How do I clean the trimmer?
After each use, disconnect power and wipe the housing with a damp cloth. Clean the cutting head area to remove grass debris. Do not use water jets.
Why is the cutting line not feeding automatically?
The line may be tangled or the spool empty. Check for line jams and ensure the line is wound evenly. Tap the head on the ground to advance.
Can I use a thicker line than recommended?
No, using a thicker line can damage the motor or spool. Always use 1.2 mm diameter line as specified.
How do I adjust the cutting width?
The cutting width is fixed. You can extend the line length by tapping the head, but for a different width, you need a different trimmer model.
What regular maintenance is needed?
After every 10 hours of use, check for loose screws, clean the air vents, and inspect the cable for damage. Replace the line as needed.
How should I store the trimmer?
Store in a dry, clean place away from direct sunlight. Coil the cable loosely, and hang the trimmer if possible to avoid damage to the cutting head.
What if the trimmer stops working suddenly?
Check the power connection and fuse. If the motor overheats, it may have a thermal cut-out that resets after cooling. If problem persists, contact Draper support.

User questions about 45927 Draper

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your String Trimmer in PDF format for free! Find your manual 45927 - Draper and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 45927 by Draper.

USER MANUAL 45927 Draper

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Draper

Model : 45927

Category : String Trimmer