JW6A - Subwoofer JENSEN - Free user manual and instructions
Find the device manual for free JW6A JENSEN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Subwoofer |
| Brand | Jensen |
| Model | JW6A |
| Speaker Size | 6.5 inches |
| Enclosure Type | Sealed |
| Impedance | 4 ohms |
| Power Handling (RMS) | 100 watts |
| Frequency Response | 30 Hz - 200 Hz |
| Dimensions (W x H x D) | 12 x 12 x 12 inches |
| Weight | 15 lbs |
| Input Connections | RCA line level, speaker level |
| Controls | Volume, crossover, phase switch |
| Power Supply | AC 120V, 60 Hz |
| Auto Power On/Off | Yes |
| Protection | Overload protection |
| Cabinet Material | MDF |
| Finish | Black vinyl |
| Maintenance | Wipe with dry cloth |
| Safety | Do not expose to water; use in dry location |
| Spare Parts Availability | Contact Jensen support |
Frequently Asked Questions - JW6A JENSEN
How do I connect the subwoofer to my amplifier?
Use an RCA cable from the subwoofer output on your receiver to the RCA input on the subwoofer. Alternatively, connect speaker wire from the amplifier's speaker terminals to the speaker level inputs.
What is the optimal placement for the subwoofer?
Place the subwoofer near a wall or corner for enhanced bass. Avoid placing it in the center of the room. Experiment with placement to achieve balanced bass response.
How do I set the crossover frequency?
Set the crossover dial to around 80 Hz for most home theater systems. Adjust higher for smaller speakers, lower for larger speakers. Listen and fine-tune.
Why is my subwoofer not turning on?
Check the power cord connection and ensure the power switch is on. If using auto-on, verify the subwoofer is receiving signal. The protection circuit may activate if overheated.
Can I use this subwoofer in a car?
This subwoofer is designed for home use with AC power. For car use, you would need a DC-to-AC inverter and ensure proper ventilation. Not recommended.
How do I adjust the phase?
Use the phase switch to toggle between 0° and 180°. Choose the setting that produces the fullest bass at your listening position, typically when the subwoofer and main speakers are in phase.
What type of cable do I need?
For RCA connection, use a standard RCA cable. For speaker level connection, use 16-18 gauge speaker wire. Keep cables shielded to reduce interference.
Is the subwoofer magnetically shielded?
No, this subwoofer is not magnetically shielded. Avoid placing it directly next to CRT televisions or magnetic media to prevent interference.
How do I clean the subwoofer?
Wipe the cabinet with a soft dry cloth. Do not use liquids or abrasive cleaners. Ensure the subwoofer is unplugged before cleaning.
What is the warranty period?
The Jensen JW6A typically comes with a 1-year limited warranty. Contact Jensen support for warranty claims and details.
User questions about JW6A JENSEN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Subwoofer in PDF format for free! Find your manual JW6A - JENSEN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. JW6A by JENSEN.
USER MANUAL JW6A JENSEN
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : JENSEN
Model : JW6A
Category : Subwoofer