STORM T3 140 - CPU cooler ANTEC - Free user manual and instructions
Find the device manual for free STORM T3 140 ANTEC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Antec |
| Model | STORM T3 140 |
| Product Type | CPU Air Cooler |
| Compatibility | Intel LGA 1700/1200/115X, AMD AM5/AM4 |
| Fan Size | 140mm |
| Fan Speed | 800 - 1800 RPM (PWM) |
| Noise Level | 15 - 30 dBA |
| Airflow | 70 - 90 CFM |
| Dimensions (W x D x H) | 140 x 90 x 160 mm |
| Weight | 800 g |
| Material | Aluminum fins, copper heat pipes, nickel-plated base |
| Number of Heat Pipes | 5 |
| Power Connector | 4-Pin PWM |
| Wattage Support (TDP) | Up to 250W |
| LED Lighting | None |
| Installation | Tool-free mounting bracket included |
| Maintenance | Clean fan and fins with compressed air every 6 months |
| Safety | Avoid touching heat pipes during operation; ensure secure mounting |
| Spare Parts | Replacement fan (140mm) and mounting kit available |
| Warranty | 2 years |
Frequently Asked Questions - STORM T3 140 ANTEC
What Intel and AMD sockets are compatible with the Antec STORM T3 140?
The cooler supports Intel LGA 1700, 1200, 115X and AMD AM5, AM4 sockets. Check the included mounting kit for specific models.
How do I install the STORM T3 140 cooler?
First, apply thermal paste to the CPU. Then attach the backplate and mounting brackets. Finally, secure the cooler with the provided screws and connect the fan to the motherboard’s CPU fan header.
Can I use the STORM T3 140 with a 250W TDP processor?
Yes, it is rated for up to 250W TDP, making it suitable for high-performance CPUs like Intel Core i9 or AMD Ryzen 9 under typical loads.
Is the fan easily replaceable?
Yes, the 140mm fan can be replaced with a standard 140mm fan. Antec offers replacement fans or you can use third-party options as long as they use a 4-pin PWM connector.
How often should I clean the cooler to maintain performance?
We recommend cleaning the fan and fins with compressed air every 6 months to prevent dust buildup and ensure optimal airflow.
Does the cooler come with pre-applied thermal paste?
Yes, the STORM T3 140 includes pre-applied thermal paste on the base. However, for best results, you may replace it with high-quality paste.
What is the noise level at maximum fan speed?
At 1800 RPM, the noise level is approximately 30 dBA, which is quiet and suitable for most environments. At lower speeds it can be as low as 15 dBA.
Can I use this cooler in a small form factor case?
The dimensions are 140 x 90 x 160 mm, so it requires a case with at least 165mm CPU cooler clearance. Check your case specifications before purchase.
Does the cooler support motherboard RGB synchronization?
No, this model does not have any RGB lighting. It is a pure performance cooler with no LED features.
What tools are needed for installation?
No specialized tools are required. A screwdriver may be needed for tightening screws, but the mounting system is tool-free for the most part.
User questions about STORM T3 140 ANTEC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your CPU cooler in PDF format for free! Find your manual STORM T3 140 - ANTEC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. STORM T3 140 by ANTEC.
USER MANUAL STORM T3 140 ANTEC
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ANTEC
Model : STORM T3 140
Category : CPU cooler