9562 - Uncategorized MILWAUKEE - Free user manual and instructions
Find the device manual for free 9562 MILWAUKEE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Corded Electric Drill (Heavy-Duty) |
| Brand | Milwaukee |
| Model | 9562 |
| Power Supply | 120V AC, 60Hz |
| Amperage | 10 A |
| Variable Speed | Yes, 0-600 RPM |
| Reversible | Yes |
| Chuck Type | Keyed, 1/2" (13 mm) capacity |
| Motor | Heavy-duty, ball bearing |
| Housing | All metal gear case |
| Handle Type | D-handle |
| Weight | 5.2 lbs (2.36 kg) |
| Cord Length | 8 ft (2.4 m) |
| Overall Length | 12.5 in (31.8 cm) |
| Double Insulated | Yes |
| Safety Lock | Trigger lock |
| Included Accessories | Side handle, chuck key |
| Warranty | 5-year limited |
| Applications | Drilling in wood, metal, plastic |
Frequently Asked Questions - 9562 MILWAUKEE
How do I change the speed on the Milwaukee 9562 drill?
The speed is controlled by the variable-speed trigger. Squeeze gently for low speed and press fully for high speed. Release the trigger to stop.
How do I reverse the direction of the drill?
Locate the forward/reverse switch above the trigger. Slide it to the left for forward (clockwise) and to the right for reverse (counterclockwise). Always wait for the chuck to stop before switching directions.
How do I change the drill bit?
First, unplug the drill. Insert the chuck key into one of the holes on the chuck and rotate it counterclockwise to loosen the jaws. Remove the old bit, insert the new bit, then tighten the chuck by rotating the key clockwise. Remove the key before use.
What is the maximum drilling capacity?
The maximum drilling capacity is up to 1/2 inch (12.7 mm) in steel and up to 1-1/2 inches (38 mm) in wood. For larger diameters, use a larger drill.
How do I maintain the drill?
Keep the air vents clean and free of debris. Wipe the exterior with a dry cloth. The gearbox is lubricated for life and requires no oiling. Periodically inspect the cord and plug for damage.
What safety precautions should I take?
Always wear safety glasses and hearing protection. Secure the workpiece with clamps. Keep hands away from the chuck. Unplug the drill when changing bits or making adjustments. Avoid drilling near water.
Can this drill be used for masonry?
No, the Milwaukee 9562 is a standard drill without a hammer function. For masonry, use a hammer drill with masonry bits.
How do I replace the carbon brushes?
The motor has serviceable brushes. Unplug the drill, remove the brush caps on the sides of the motor housing, and pull out the old brushes. Insert new brushes of the same size, reassemble, and run the drill for 5 minutes to seat them.
Where can I find replacement parts?
Genuine Milwaukee parts are available through authorized service centers and online retailers. Use the model 9562 to search for parts like the chuck, switch, or cord.
What does the trigger lock do?
The trigger lock prevents accidental starting. When the lock is engaged, the trigger cannot be pressed. It is a safety feature used during transport or storage.
User questions about 9562 MILWAUKEE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual 9562 - MILWAUKEE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 9562 by MILWAUKEE.
USER MANUAL 9562 MILWAUKEE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MILWAUKEE
Model : 9562
Category : Uncategorized