PPA00-10985 - Pets PETSAFE - Free user manual and instructions
Find the device manual for free PPA00-10985 PETSAFE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Replacement Collar Receiver for Wireless Fence |
| Brand | PetSafe |
| Model | PPA00-10985 |
| Dimensions (Receiver) | 1.5 x 1.0 x 0.5 inches |
| Weight | 0.8 oz (23 g) |
| Power Source | Rechargeable Lithium-Ion Battery |
| Battery Life | Up to 2 weeks on a full charge |
| Charging Time | 2-3 hours |
| Waterproof Rating | IPX7 (submersible up to 1 meter) |
| Correction Levels | 4 static levels plus tone and vibration |
| Range from Transmitter | Up to 1/2 acre (adjustable) |
| Compatibility | PetSafe Wireless Fence Transmitter PIF-300 |
| Neck Size | Fits collars up to 28 inches |
| Operating Temperature | -10°C to 50°C (14°F to 122°F) |
| Maintenance | Clean with damp cloth; replace contact points as needed |
| Safety Features | Automatic shut-off after 2 hours of non-use; low battery indicator |
| Spare Parts Available | Replacement contact points, collar straps, battery pack |
| Repairability | Battery replaceable by user; other parts via PetSafe service |
| Warranty | 1 year limited warranty |
| Certifications | FCC, CE, RoHS |
Frequently Asked Questions - PPA00-10985 PETSAFE
How do I charge the collar receiver?
Connect the included charging cable to the charging port on the receiver. Plug the USB end into a 5V adapter. The LED will turn red while charging and green when fully charged (approximately 2-3 hours).
How do I pair the receiver with my wireless fence transmitter?
Turn on the transmitter and place the receiver near it. Press and hold the Pairing button on the receiver until the LED flashes. Release and wait for a solid green light, indicating successful pairing. See manual for detailed steps.
What correction levels are available?
The collar offers 4 static correction levels (1-4), plus a tone-only mode and a vibration mode. Start with the lowest level and adjust based on your pet's temperament.
Is the collar waterproof?
Yes, the receiver has an IPX7 rating, meaning it can be submerged in up to 1 meter of water for 30 minutes. Perfect for outdoor use in rain or puddles.
How do I replace the battery?
The battery is user-replaceable. Remove the back cover with a small Phillips screwdriver, disconnect the old battery, and insert a new PetSafe replacement pack (model RFA-118). Reassemble and charge fully.
What do the LED lights indicate?
Solid green: paired and ready. Flashing green: low battery. Solid red: charging. Flashing red: error (contact support). No light: battery dead or not paired.
Can I use this receiver with other PetSafe systems?
This receiver is specifically designed for the PetSafe Wireless Fence system (model PIF-300). It may not be compatible with other brands or older transmitters. Check compatibility before use.
How do I clean the collar?
Use a damp cloth to wipe the receiver and collar strap. Avoid abrasive cleaners. Dry thoroughly before charging or storing. Replace contact points if they show wear.
What should I do if the collar stops working?
First, charge the battery fully. If still not working, try re-pairing with the transmitter. Check if the contact points are clean and tight. If the issue persists, contact PetSafe support at 1-800-732-2677.
What safety features does the collar have?
The collar has an automatic shut-off after 2 hours of non-use to save battery. It also includes a low-battery indicator (flashing green). For training safety, always start with the lowest correction level.
User questions about PPA00-10985 PETSAFE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pets in PDF format for free! Find your manual PPA00-10985 - PETSAFE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PPA00-10985 by PETSAFE.