HT1250 - Walkie-talkie MOTOROLA - Free user manual and instructions
Find the device manual for free HT1250 MOTOROLA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Two-Way Radio |
| Brand | Motorola |
| Model | HT1250 |
| Frequency Range | VHF 136-174 MHz or UHF 403-470 MHz |
| Power Output | 1-5 Watts (selectable) |
| Number of Channels | 128 |
| Battery Type | Rechargeable NiMH or Li-Ion |
| Battery Life | Up to 16 hours (low power) |
| Display | Backlit LCD |
| Dimensions (H x W x D) | 5.1 x 2.5 x 1.8 inches (130 x 63 x 46 mm) |
| Weight (with battery) | 14 oz (400 g) |
| Key Features | MDC1200 signaling, programmable buttons, scan, voice activation |
| Accessories Included | Belt clip, antenna, battery, charger |
| Care Instructions | Clean with damp cloth; avoid solvents |
| Safety Precautions | Use only approved batteries; avoid explosive environments |
| Spare Parts Availability | Batteries, antennas, chargers available |
| General | Rugged design; IP54 rating |
Frequently Asked Questions - HT1250 MOTOROLA
How do I program channels on the Motorola HT1250?
You can program channels using Motorola CPS (Customer Programming Software) connected via a programming cable, or manually through the front panel menu if enabled.Refer to the programming guide for detailed steps.
What is the typical range of the HT1250?
Range depends on terrain and conditions. Typically up to 5 miles in open areas with line of sight, and less in urban or hilly environments.
How do I change the battery?
Slide the battery latch downward, then lift the battery away from the radio. Insert a new battery by aligning the tabs and pressing until the latch clicks. Use only Motorola-approved batteries.
Can I use the HT1250 on GMRS/FRS frequencies?
No. The HT1250 is designed for business/industrial use and requires an FCC license for operation. It does not operate on GMRS/FRS bands.
How do I adjust the squelch level?
Press the Menu button, navigate to Squelch, then adjust level from 0 (tight) to 9 (loose). Default setting is usually 5. Tight squelch reduces background noise but may miss weak signals.
How to use the scan function?
Press the Scan button (if programmed). The radio will cycle through programmed channels. To stop scanning, press the PTT button or Scan button again. Scan list can be customized via CPS.
How do I charge the HT1250?
Place the radio with battery in the supplied desktop charger or drop-in charger. Ensure the contacts align. Charging time is typically 2-3 hours for a full charge.
What is the warranty on the HT1250?
Motorola usually offers a 1-year limited warranty against defects in materials and workmanship. Check with your dealer for specific terms.
How to perform a factory reset?
Enter the menu, select 'Utilities', then 'Reset'. Confirm reset. This will erase all programmed settings and channels. Alternatively, use CPS software to revert to defaults.
Is the HT1250 compatible with other Motorola radios?
Yes, it can communicate with other Motorola radios operating on the same frequency band (VHF or UHF) with compatible signaling (e.g., MDC1200).
User questions about HT1250 MOTOROLA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Walkie-talkie in PDF format for free! Find your manual HT1250 - MOTOROLA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HT1250 by MOTOROLA.
USER MANUAL HT1250 MOTOROLA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MOTOROLA
Model : HT1250
Category : Walkie-talkie