Growatt

MOD 3-15KTL3-HU - Battery charger Growatt - Free user manual and instructions

Find the device manual for free MOD 3-15KTL3-HU Growatt in PDF.

📄 54 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Growatt MOD 3-15KTL3-HU - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Hybrid Solar Inverter / Battery Charger
Brand Growatt
Model MOD 3-15KTL3-HU
Rated Power 3-15 kW (depending on configuration)
Phase 3-phase
Max PV Input Voltage 1000 V
MPPT Range 200-850 V
Battery Voltage Range 160-600 V
Max Charging Current 25 A (typical)
Battery Types Supported Lithium-ion, Lead-acid
Efficiency (Max) 98%
Protection Degree IP65 (outdoor installation)
Operating Temperature Range -25°C to +60°C
Dimensions (W x H x D) 530 x 490 x 180 mm
Weight 35 kg
Display LCD screen with touch (or buttons)
Communication Interfaces RS485, Wi-Fi (optional)
Warranty 5 years (standard)
Safety Certifications CE, TUV, VDE, AS/NZS 4777
Key Features AC coupling, backup power, grid-tie, high-voltage battery support

Frequently Asked Questions - MOD 3-15KTL3-HU Growatt

What is the maximum PV power that can be connected to the MOD 3-15KTL3-HU?
The maximum PV input power is typically 1.5 times the rated power, e.g., up to 22.5 kW for a 15 kW model. Always refer to the datasheet for exact limits.
Can this inverter work without a battery?
Yes, it can operate as a standard grid-tie inverter without a battery. The battery port can be left unused.
What types of batteries are compatible?
It supports high-voltage lithium-ion batteries (e.g., Growatt ARK series) and lead-acid batteries. The voltage range is 160-600 V.
Is the MOD 3-15KTL3-HU suitable for outdoor installation?
Yes, it has an IP65 rating, meaning it is dust-tight and protected against low-pressure water jets, suitable for outdoor mounting.
How do I connect the inverter to my home network for monitoring?
Use the built-in RS485 port or optional Wi-Fi dongle. The Growatt Shine app allows remote monitoring and configuration.
What is the maximum charging current?
The maximum charging current is typically 25 A, but it may vary based on battery voltage and model variant.
Does the inverter provide backup power during a grid outage?
Yes, with a properly connected battery, it can supply backup power to critical loads via its EPS (Emergency Power Supply) output.
What are the required clearances for installation?
Leave at least 300 mm on each side and 500 mm above and below for adequate ventilation and access.
Can I use the inverter with different solar panel orientations?
Yes, it has two MPPT trackers, allowing two independent strings with different orientations or tilts.
How often should I clean the inverter?
Inspect and clean the heat sink and fan filters every 6-12 months, depending on dust levels. Use a soft brush or compressed air.

User questions about MOD 3-15KTL3-HU Growatt

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Battery charger in PDF format for free! Find your manual MOD 3-15KTL3-HU - Growatt and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MOD 3-15KTL3-HU by Growatt.

USER MANUAL MOD 3-15KTL3-HU Growatt

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Growatt

Model : MOD 3-15KTL3-HU

Category : Battery charger