ME 30B - Mixer Rane - Free user manual and instructions
Find the device manual for free ME 30B Rane in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Mixer |
| Brand | Rane |
| Model | ME 30B |
| Category | Mixing Console |
| Number of Channels | 6 |
| Inputs | 6 x XLR/TRS combo, 2 x RCA, 1 x 1/4" TRS aux |
| Outputs | 2 x XLR main, 2 x 1/4" TRS monitor, 1 x RCA record out |
| Frequency Response | 20 Hz - 20 kHz |
| Signal-to-Noise Ratio | 90 dB |
| Total Harmonic Distortion | 0.005% |
| EQ per Channel | 3-band (Low, Mid, High) |
| Power Supply | 100-240V AC, 50/60 Hz |
| Power Consumption | 30 W |
| Dimensions (W x D x H) | 19" x 10" x 3.5" (rack mount) |
| Weight | 8 lbs |
| Rack Mountable | Yes, 1U |
| Material | Steel chassis |
| Cleaning | Wipe with a dry cloth |
| Safety | Do not expose to moisture or liquids |
| Reparability | Refer to qualified service personnel |
Frequently Asked Questions - ME 30B Rane
How to connect a microphone to the ME 30B?
Connect your microphone using an XLR cable to any of the combo input jacks. Ensure phantom power is enabled if using a condenser mic (press the 48V button if available).
How to adjust the EQ on a channel?
Each channel has three EQ knobs: Low, Mid, and High. Turn clockwise to boost, counterclockwise to cut. Use moderate adjustments to avoid distortion.
What power supply does the ME 30B require?
The mixer operates on 100-240V AC, 50/60 Hz. It uses a standard IEC power cable. Ensure the voltage matches your local mains.
How to clean the mixer?
Disconnect the power and use a soft, dry cloth to wipe the surface. Do not use any liquids or abrasive cleaners, as they may damage the controls.
Can the ME 30B be rack mounted?
Yes, it is 1U rack-mountable. Use the included rack ears to mount it securely in a standard 19-inch rack.
What is the warranty period for the ME 30B?
Rane typically offers a 2-year limited warranty. Check your purchase documentation or contact Rane support for specific terms.
No sound coming from the speakers. What should I check?
First, ensure the mixer is powered on and the master volume is up. Check that input cables are securely connected and the channel faders are not at zero. Also verify that the output cables are connected to the correct jacks.
Can I use the ME 30B with a computer?
The ME 30B is an analog mixer without USB connectivity. To use with a computer, connect the mixer's main outputs to an audio interface via balanced cables.
How to connect external effects?
Use the aux send (1/4" TRS) to route signal to an external effects unit. Connect the effect return to an available channel or aux return input to blend the effected signal.
What is the output impedance of the ME 30B?
The main XLR outputs have a low impedance of 100 ohms, suitable for driving long cable runs. The monitor outputs are also low impedance.
User questions about ME 30B Rane
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Mixer in PDF format for free! Find your manual ME 30B - Rane and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ME 30B by Rane.
USER MANUAL ME 30B Rane
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Rane
Model : ME 30B
Category : Mixer