27B2N4500 - Monitor PHILIPS - Free user manual and instructions
Find the device manual for free 27B2N4500 PHILIPS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 27-inch LED Monitor |
| Model | 27B2N4500 |
| Brand | Philips |
| Screen Size | 27 inches (68.6 cm) |
| Resolution | 1920 x 1080 (Full HD) |
| Refresh Rate | 75 Hz |
| Panel Type | IPS |
| Aspect Ratio | 16:9 |
| Brightness | 250 cd/m² |
| Contrast Ratio | 1000:1 (typical) |
| Response Time | 4 ms (GtG) |
| Viewing Angle | 178°/178° horizontal/vertical |
| Connectivity | 1x VGA, 1x DVI-D, 1x HDMI, 1x DisplayPort |
| USB Ports | None (or optional USB hub not specified) |
| Speakers | Built-in 2W x 2 speakers |
| VESA Mount | 100 x 100 mm |
| Dimensions (with stand) | 613 x 460 x 230 mm (WxHxD) |
| Weight (with stand) | Approx. 5.5 kg |
| Power Consumption | Operating: 25W typical; Standby: <0.5W |
| Power Supply | External adapter (100-240V AC) |
| Adjustability | Tilt: -5° to +20° |
| Security | Kensington lock slot |
| Cleaning | Wipe with a soft dry cloth; do not use solvents |
| Spare Parts & Repairability | Contact Philips support for spare parts; user replaceable stand only |
Frequently Asked Questions - 27B2N4500 PHILIPS
How do I connect my monitor to my computer?
Use the provided HDMI, DisplayPort, DVI-D, or VGA cable. Connect one end to the monitor and the other to your computer's corresponding port. Ensure both devices are powered off before connecting.
Why is there no picture on my screen?
Check that the monitor is powered on (LED indicator should be blue). Verify the cable connection is secure. Ensure your computer is outputting to the correct display. Try pressing the input source button to cycle through inputs.
How do I adjust the brightness and contrast?
Press the Menu button on the monitor's bezel to open the OSD (On-Screen Display). Navigate to 'Picture' settings using the arrow keys, then adjust Brightness and Contrast as desired.
Can I mount this monitor on a wall?
Yes, the monitor supports VESA 100x100 mm mounting. Remove the stand and attach a compatible wall mount bracket. Use screws of appropriate length (M4, 10mm max).
What should I do if the screen flickers?
First, check your cable connections. If using VGA, try tightening the screws. Ensure the refresh rate is set correctly in your display settings (60Hz or 75Hz). Update your graphics driver.
How do I clean the monitor screen?
Turn off the monitor and unplug it. Use a soft, lint-free cloth slightly dampened with water. Gently wipe the screen in a circular motion. Never use alcohol, ammonia, or abrasive cleaners.
Does this monitor have built-in speakers?
Yes, it has two built-in speakers (2W each) for basic audio output. For better sound, use external speakers via the audio out jack or connect via HDMI/DisplayPort.
How can I reset the monitor to factory settings?
Press the Menu button, then navigate to 'Setup' or 'Other Settings'. Select 'Factory Reset' and confirm. This will restore all OSD settings to defaults.
What is the warranty period for this monitor?
Philips typically offers a 2-year warranty for monitors. Check your country-specific warranty card or contact Philips support for exact terms.
Why is the monitor displaying 'No Signal'?
Ensure the correct input source is selected. Press the input button to cycle through VGA, DVI, HDMI, and DisplayPort. Also verify that the cable is connected to the correct port on both devices and that your computer is powered on.
User questions about 27B2N4500 PHILIPS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Monitor in PDF format for free! Find your manual 27B2N4500 - PHILIPS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 27B2N4500 by PHILIPS.