ES-3308P V3 - Switch Edimax - Free user manual and instructions
Find the device manual for free ES-3308P V3 Edimax in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Managed Gigabit PoE+ Switch |
| Brand | Edimax |
| Model | ES-3308P V3 |
| Ports | 8 x 10/100/1000 Mbps PoE+ (802.3at/af) + 2 x Gigabit SFP |
| PoE Budget | 130 Watts |
| Switching Capacity | 20 Gbps |
| Forwarding Rate | 14.88 Mpps |
| MAC Address Table Size | 8K entries |
| Dimensions (W x D x H) | 280 x 180 x 44 mm |
| Weight | 2.1 kg |
| Power Supply | AC 100-240V, 50/60 Hz, built-in adapter |
| Cooling | Fanless (silent operation) |
| Operating Temperature | 0°C to 50°C |
| Humidity | 10% to 90% (non-condensing) |
| Management | Web GUI, SNMP v1/v2c/v3, CLI (Telnet/SSH), VLAN, QoS, IGMP Snooping, Link Aggregation, RSTP, Port Mirroring |
| Mounting | Desktop or 19-inch rackmount (brackets included) |
| Safety Certifications | CE, FCC, RoHS |
| Maintenance | Clean with dry cloth; avoid liquids; ensure proper ventilation |
| Warranty | 2 years limited |
Frequently Asked Questions - ES-3308P V3 Edimax
How do I access the web management interface of the ES-3308P V3?
Connect your computer to any port and set a static IP in the same subnet as the switch's default IP (192.168.2.1). Open a browser and go to 192.168.2.1. Default username and password are admin and 1234 (or check label).
Does the ES-3308P V3 support PoE+ on all ports?
Yes, all eight copper ports support IEEE 802.3at/af (PoE+) with a total power budget of 130 Watts. Each port can deliver up to 30W.
Can I use the SFP ports for uplink?
Yes, the two Gigabit SFP slots are dedicated for uplink or fiber connections. They do not provide PoE and are independent of the copper ports.
How to reset the switch to factory defaults?
Press and hold the Reset button on the front panel for about 10 seconds until the power LED flashes. Release and wait for the switch to reboot.
Does this switch support VLAN configuration?
Yes, it supports 802.1Q VLAN with up to 256 VLANs. You can configure port-based or tagged VLANs via the web interface.
What is the maximum cable length for PoE?
The maximum cable length for PoE is 100 meters (328 feet) for Cat5e or better cables.
How can I update the firmware?
Download the latest firmware from the Edimax support page. In the web interface, go to System > Firmware Upgrade, select the file, and click Upgrade. Do not power off during upgrade.
Is the switch rackmountable?
Yes, it comes with rackmount ears for 19-inch standard racks. The height is 1U (44mm).
What LED indicators mean?
Power LED: solid green when on. PoE LED: green for PoE active. Link/Act: green for link, blinking for activity. SFP: green when link is established.
How to configure Quality of Service (QoS)?
Go to QoS in the web UI. You can set port-based priority or 802.1p priority queues. Assign higher priority to delay-sensitive traffic like VoIP or video.
User questions about ES-3308P V3 Edimax
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual ES-3308P V3 - Edimax and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ES-3308P V3 by Edimax.
USER MANUAL ES-3308P V3 Edimax
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Edimax
Model : ES-3308P V3
Category : Switch