90T01 - Range hood MIDEA - Free user manual and instructions
Find the device manual for free 90T01 MIDEA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Under-cabinet range hood |
| Model | 90T01 |
| Brand | Midea |
| Mounting type | Under cabinet |
| Width | 90 cm (36 inches) |
| Depth | Approximately 50 cm (20 inches) |
| Height | Approximately 10-15 cm (4-6 inches) |
| Net weight | Approximately 12 kg (26 lbs) |
| Power supply | 220-240 V, 50/60 Hz |
| Maximum power | 250 W |
| Motor type | Single motor |
| Number of speeds | 3 |
| Extraction capacity | Up to 600 m³/h |
| Noise level | 55-65 dB(A) |
| Lighting | 2 x LED lights (1.5 W each) |
| Control type | Electronic touch buttons |
| Filter type | Aluminum grease filter (dishwasher safe) |
| Ducting | Optional recirculation or extraction (150 mm duct) |
| Energy class | A |
| Annual energy consumption | Approximately 30 kWh/year |
Frequently Asked Questions - 90T01 MIDEA
How do I install the Midea 90T01 range hood?
Installation must be done by a qualified technician. Ensure the hood is at least 65 cm above the cooking surface. Fix the hood to the cabinet using the provided screws and brackets. Connect the ducting for extraction or install carbon filters for recirculation mode. Refer to the manual for detailed steps.
How do I clean the grease filters?
The aluminum grease filters can be cleaned in a dishwasher or by hand with warm soapy water. Allow them to dry completely before reinstalling. Clean filters every 2-3 months or more frequently if used heavily.
Can I use the range hood without ducting?
Yes, the Midea 90T01 can be used in recirculation mode. You need to install activated carbon filters (sold separately) to absorb odors. The air is then recirculated into the kitchen.
How do I change the LED lights?
The LED lights are integrated and require a technician for replacement. Contact Midea support or a qualified professional. Do not attempt to replace them yourself to avoid electrical hazard.
What is the noise level of the hood?
The noise level varies by speed: approximately 55 dB on low speed and up to 65 dB on high speed.
Does the hood require a dedicated electrical circuit?
It is recommended to have a dedicated circuit rated for the hood's power consumption (250 W). Use a properly grounded outlet. If in doubt, consult an electrician.
How often should I replace the carbon filter?
Activated carbon filters should be replaced every 3-6 months depending on usage. When odors are no longer effectively absorbed, it's time to replace them.
What is the warranty period for the Midea 90T01?
Midea typically offers a 2-year warranty on this range hood. Check your local warranty card or contact Midea support for details specific to your region.
How do I adjust the fan speed?
Use the touch control panel. Press the fan button to toggle between low (1), medium (2), and high (3) speeds. An indicator light shows the current setting.
What should I do if the hood stops working?
First, check the power supply and circuit breaker. If it's plugged in but not working, try resetting the unit by unplugging for 5 minutes. If the issue persists, contact Midea customer service for repairs.
User questions about 90T01 MIDEA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual 90T01 - MIDEA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 90T01 by MIDEA.
USER MANUAL 90T01 MIDEA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MIDEA
Model : 90T01
Category : Range hood