TLCR-525 - Loudspeaker Taga Harmony - Free user manual and instructions
Find the device manual for free TLCR-525 Taga Harmony in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Center Channel Loudspeaker |
| Brand | Taga Harmony |
| Model | TLCR-525 |
| Enclosure Type | Bass Reflex (Rear Ported) |
| Number of Drivers | 3 (2 woofers, 1 tweeter) |
| Woofer Size | 2 x 5.25 inches (133 mm) |
| Tweeter Size | 1 inch (25 mm) Soft Dome |
| Frequency Response | 55 Hz - 22 kHz |
| Impedance | 8 Ohms |
| Sensitivity | 89 dB (2.83V/1m) |
| Recommended Amplifier Power | 20 - 150 Watts RMS |
| Dimensions (W x H x D) | 17.7 x 6.7 x 9.8 inches (450 x 170 x 250 mm) |
| Weight | 16.5 lbs (7.5 kg) |
| Finish Options | Black Ash, Cherry, Walnut (Simulated Wood Veneer) |
| Wiring | Single Wire (Gold-Plated Binding Posts) |
| Grille | Detachable Magnetic Grille |
| Warranty | 5 Years (Limited) |
| Cleaning | Wipe with dry cloth; avoid solvents |
| Placement | Center channel above or below TV, at ear level |
| Included Accessories | User manual, rubber feet |
Frequently Asked Questions - TLCR-525 Taga Harmony
What is the recommended placement for the TLCR-525 center speaker?
Place the TLCR-525 directly above or below your TV, at ear level when seated. Ensure it is centered between the left and right speakers for optimal soundstage. Avoid placing it inside enclosed cabinets to prevent bass reflections.
Can I bi-wire the TLCR-525?
No, the TLCR-525 is designed for single-wire connection only. It does not have separate terminals for bi-wiring. Connect your amplifier using a single pair of speaker cables.
What is the power handling of this speaker?
The recommended amplifier power is 20 to 150 Watts RMS. The speaker can handle peaks up to 200 Watts. Using a more powerful amplifier is acceptable as long as you avoid distortion.
Does the TLCR-525 require a break-in period?
Yes, it is recommended to allow 20-30 hours of playback at moderate volume for the drivers to reach their optimal performance. The sound will improve in terms of clarity and bass response.
How do I clean the speaker?
Use a soft, dry microfiber cloth to gently wipe the cabinet and grille. Do not use any cleaning agents, liquids, or abrasive materials as they may damage the finish or drivers.
Can I mount the TLCR-525 on a wall?
The TLCR-525 is not designed for wall mounting. It is intended for shelf or stand placement. If wall mounting is required, consult a professional and ensure the wall bracket can support its weight.
What is the impedance of the TLCR-525?
The nominal impedance is 8 Ohms, making it compatible with most AV receivers and amplifiers. Ensure your amplifier can drive 8 Ohm loads without issues.
How do I connect the TLCR-525 to my AV receiver?
Connect the speaker using standard speaker cables. Strip about 1/2 inch of insulation, insert into the binding posts (red positive, black negative), and tighten. Ensure correct polarity for phase coherence.
What finishes are available for this speaker?
The TLCR-525 is available in Black Ash, Cherry, and Walnut simulated wood veneer finishes. Check with your dealer for current availability.
Does the TLCR-525 come with a warranty?
Yes, Taga Harmony offers a limited 5-year warranty on the TLCR-525. The warranty covers manufacturing defects but not damage from misuse or improper installation. Keep your proof of purchase.
User questions about TLCR-525 Taga Harmony
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual TLCR-525 - Taga Harmony and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TLCR-525 by Taga Harmony.
USER MANUAL TLCR-525 Taga Harmony
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Taga Harmony
Model : TLCR-525
Category : Loudspeaker