AT-OCS-900N - Motion detector Atlona - Free user manual and instructions
Find the device manual for free AT-OCS-900N Atlona in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Motion Detector |
| Brand | Atlona |
| Model | AT-OCS-900N |
| Detection Technology | Passive Infrared (PIR) |
| Detection Range | Up to 12 meters (40 ft) |
| Detection Angle | 110 degrees |
| Power Supply | 12V DC, 500mA |
| Mounting Type | Wall or Ceiling mount |
| Dimensions (HxWxD) | 110 x 65 x 45 mm |
| Weight | 120 g |
| Operating Temperature | -10°C to 50°C |
| IP Rating | IP54 |
| Output | Relay (NC/NO), max 30V DC/1A |
| Adjustable Timer | 10 seconds to 30 minutes |
| Adjustable Light Level | Day/Night mode (10-2000 lux) |
| LED Indicator | Red for detection, green for standby |
| Compliance | CE, RoHS |
| Warranty | 2 years |
| Maintenance | Clean with dry cloth; avoid solvents |
| Safety | Use only with specified power supply; professional installation recommended |
| Repair | Not user-serviceable; contact Atlona support |
Frequently Asked Questions - AT-OCS-900N Atlona
How do I install the Atlona AT-OCS-900N motion detector?
Mount the detector on a wall or ceiling at a height of 2-2.5 meters. Ensure the detection area is clear of obstructions. Connect the power supply (12V DC) and output relay wires according to the wiring diagram. Professional installation is recommended for integrated security systems.
What is the detection range of this motion detector?
The AT-OCS-900N has a detection range of up to 12 meters (40 feet) in a 110-degree angle. Range may vary depending on environmental conditions and installation height.
Can I use this motion detector outdoors?
Yes, the device has an IP54 rating, making it suitable for outdoor use in covered areas protected from direct rain and splashes. Avoid exposure to extreme weather.
How do I adjust the sensitivity of the detector?
Use the sensitivity adjustment knob (typically a potentiometer) on the device. Turn clockwise to increase sensitivity, counterclockwise to decrease. Test after adjustment to avoid false alarms.
What does the LED indicator mean?
A red LED flashes when motion is detected. A green LED indicates the device is powered and in standby. If no LED, check power connections.
What are the power supply requirements?
The detector requires a 12V DC power supply with a minimum current of 500mA. Use only the recommended adapter to avoid damage.
Does the motion detector work with pets?
The detector can be adjusted to ignore small animals by lowering sensitivity or using a pet immunity setting (if available). For best results, mount at the recommended height and angle.
Can I connect this detector to a security alarm system?
Yes, the relay output (NC/NO) can be connected to alarm panels, lighting controls, or other devices. Ensure the load does not exceed 30V DC / 1A.
How should I clean the motion detector?
Wipe the casing gently with a soft, dry cloth. Do not use water, solvents, or abrasive cleaners, as they may damage the sensor lens.
What if the motion detector stops working?
First, check the power supply and connections. Ensure the detection zone is not blocked. Reset the device by disconnecting power for 10 seconds. If the issue persists, contact Atlona support for assistance.
User questions about AT-OCS-900N Atlona
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Motion detector in PDF format for free! Find your manual AT-OCS-900N - Atlona and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AT-OCS-900N by Atlona.
USER MANUAL AT-OCS-900N Atlona
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Atlona
Model : AT-OCS-900N
Category : Motion detector