DKFD-27 - Fan heater CRUX - Free user manual and instructions
Find the device manual for free DKFD-27 CRUX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Fan Heater |
| Brand | CRUX |
| Model | DKFD-27 |
| Dimensions (W x H x D) | Approx. 20 x 25 x 15 cm |
| Weight | Approx. 1.5 kg |
| Power Supply | 220-240V ~ 50Hz |
| Power Consumption | 2000W |
| Heating Settings | 2 levels (low/high) plus fan-only mode |
| Thermostat | Adjustable thermostat |
| Oscillation | Yes, wide-angle oscillation |
| Overheat Protection | Automatic shut-off if overheated |
| Tip-Over Switch | Automatic shut-off if tipped over |
| Safety Certification | CE, RoHS |
| Material | High-grade plastic with metal grille |
| Cleaning Instructions | Wipe with damp cloth; unplug before cleaning |
| Filter | Washable dust filter |
| Noise Level | Approx. 45 dB |
| User Manual Included | Yes, PDF available for download |
Frequently Asked Questions - DKFD-27 CRUX
How do I adjust the thermostat?
Turn the thermostat knob clockwise to increase the target temperature. The heater will cycle on and off to maintain the set temperature.
Can I use the fan heater in a bathroom?
No, this fan heater is not rated for bathroom use. It should only be used in dry indoor areas away from water sources.
The heater turns off by itself. What's wrong?
This is normal safety behavior. The heater may have reached the set temperature, or it could be due to overheating or tip-over protection. Ensure proper ventilation and place on a flat, stable surface.
How do I clean the filter?
Unplug the heater and remove the rear grille. The washable filter can be rinsed under lukewarm water. Let it dry completely before reinserting.
What is the difference between fan only and heat settings?
In fan-only mode, the heater blows unheated air. Low heat provides around 1000W, high heat 2000W. Use fan-only for cooling in summer.
Can I leave the heater unattended overnight?
It is not recommended to leave any heater unattended for long periods. Always turn off and unplug when leaving the room or sleeping.
Why does the heater emit a smell when first used?
A slight burning smell is normal during initial use as manufacturing residues burn off. Ensure good ventilation and run on high for 15 minutes.
What is the recommended room size for this heater?
This 2000W heater is suitable for rooms up to 20 square meters (215 square feet), depending on insulation.
How do I reset the overheat protection?
Unplug the heater and allow it to cool down for about 30 minutes. Plug it back in and turn on. If it still trips, contact support.
Is a power cord included?
Yes, the heater comes with a 1.5-meter power cord and a standard plug. Do not use an extension cord.
User questions about DKFD-27 CRUX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Fan heater in PDF format for free! Find your manual DKFD-27 - CRUX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DKFD-27 by CRUX.
USER MANUAL DKFD-27 CRUX
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : CRUX
Model : DKFD-27
Category : Fan heater