ITB400 - Home Theater iLive - Free user manual and instructions
Find the device manual for free ITB400 iLive in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Home Theater System |
| Brand | iLive |
| Model | ITB400 |
| Dimensions (W x H x D) | Approximately 17 x 5 x 12 inches (430 x 130 x 305 mm) |
| Weight | Approximately 8.5 lbs (3.9 kg) |
| Power Supply | AC 120V, 60Hz |
| Power Consumption | 100W (max) |
| Audio Output | Up to 5.1 channel surround sound |
| Supported Disc Formats | DVD, CD, MP3, JPEG |
| Connectivity | HDMI, USB, AUX, FM Radio |
| Remote Control | Included (battery operated) |
| Speakers | 4 satellite speakers + 1 subwoofer (wired) |
| Speaker Impedance | 4 ohms each |
| Frequency Response | 20Hz - 20kHz |
| Amplifier Power | 100W RMS total |
| Cleaning Instructions | Wipe with a soft, dry cloth. Do not use liquid cleaners. |
| Safety Features | Built-in surge protection, auto power-off after 15 minutes of inactivity |
| Spare Parts Availability | Contact iLive customer service for replacement remote or speakers |
| Warranty | 1 year limited warranty |
| Manual Language | English (original) |
Frequently Asked Questions - ITB400 iLive
How do I connect the ITB400 to my TV?
Use the HDMI cable (not included) to connect the HDMI output on the back of the main unit to an HDMI input on your TV. Alternatively, you can use the AUX input with a 3.5mm audio cable.
Can I play music from my phone?
Yes, you can play music via Bluetooth (if supported) or by connecting your phone to the USB port or AUX input.
Why is there no sound from the subwoofer?
Ensure the subwoofer is properly connected to the main unit with the provided cable. Also, check that the audio settings are not set to 'Stereo' only; set to 'Surround' for subwoofer output.
How do I program the remote control?
The remote uses a CR2025 battery. Insert the battery with correct polarity and point the remote at the unit. No programming is needed; it works out of the box.
What should I do if the disc doesn't play?
Make sure the disc is clean and inserted label-side up. Check if the disc format is supported (DVD, CD, MP3, JPEG). Also, ensure the unit is in DVD mode.
Can I add extra speakers?
No, the system is designed for the included 5 speakers only. The amplifier channels are fixed.
How do I reset the system?
Unplug the power cord for 30 seconds, then plug it back in. This will reset the system to factory defaults.
Does the ITB400 support Dolby Digital?
Yes, it supports Dolby Digital decoding for a true surround sound experience.
What is the maximum USB drive size supported?
The USB port supports drives up to 32GB formatted in FAT32.
Where can I find the serial number?
The serial number is located on the back panel of the main unit, near the power cord.
User questions about ITB400 iLive
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Home Theater in PDF format for free! Find your manual ITB400 - iLive and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ITB400 by iLive.
USER MANUAL ITB400 iLive
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : iLive
Model : ITB400
Category : Home Theater