FHCP061AKR - Air conditioner FREONIC - Free user manual and instructions
Find the device manual for free FHCP061AKR FREONIC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Portable Air Conditioner |
| Model | FHCP061AKR |
| Brand | FREONIC |
| Cooling Capacity | 6,000 BTU/h |
| Dimensions (H x W x D) | 27.2 x 16.5 x 16.5 in |
| Weight | 52 lbs |
| Power Supply | 115 V ~ 60 Hz, 5.0 A |
| Energy Efficiency Ratio (EER) | 12.0 |
| Refrigerant Type | R-410A |
| Modes | Cool, Fan, Dehumidify |
| Fan Speeds | 3 (Low, Medium, High) |
| Thermostat Range | 62°F - 86°F (16°C - 30°C) |
| Noise Level (Low/High) | 52 dB / 56 dB |
| Air Flow (High) | 180 CFM |
| Coverage Area | Up to 250 sq ft |
| Filter Type | Washable Mesh Filter |
| Drainage | Self-evaporating (continuous drainage for humid conditions) |
| Installation Kit Included | Window kit (adjustable for vertical/horizontal sliding windows) |
| Control Type | Touch control panel + Remote control |
| Display | LED digital display |
| Timer | 24-hour on/off timer |
| Safety Features | Auto shut-off, overheat protection, tip-over switch |
| Warranty | 1 year limited |
| Included Accessories | Remote control, window kit, exhaust hose, user manual |
Frequently Asked Questions - FHCP061AKR FREONIC
How do I install the FHCP061AKR air conditioner?
The unit comes with a window installation kit. Follow the manual: extend the exhaust hose to the window adapter, secure the window panel in the sash, and plug in the unit. Ensure the hose is not kinked for proper airflow.
How often should I clean the filter?
Clean the washable mesh filter every two weeks during heavy use. Remove the filter, rinse with water, let it dry completely, and reinsert. A dirty filter reduces efficiency.
What does error code E2 mean?
Error E2 indicates a problem with the room temperature sensor. Try resetting the unit by unplugging for 5 minutes. If the error persists, contact customer support.
Can I use this air conditioner in a room with no window?
No, the FHCP061AKR requires a window to vent the hot exhaust air. Without proper ventilation, the unit cannot cool effectively and may overheat.
How do I switch between cooling, fan, and dehumidify modes?
Press the Mode button on the remote or control panel repeatedly to cycle through Cool, Fan, and Dry (dehumidify) modes. The selected mode will appear on the display.
Does this unit require continuous drainage?
In normal operation, the unit is self-evaporating. However, in very humid conditions (above 70% RH), you may need to connect the included drain hose to the bottom drain outlet for continuous drainage.
What is the power consumption of this air conditioner?
The FHCP061AKR draws about 5.0 amps at 115V, consuming approximately 575 watts during cooling. Actual consumption varies with settings and room conditions.
How do I set the timer?
Press the Timer button on the remote. Use + or - to set the desired hours (1-24). The timer can be set to turn the unit on or off automatically.
Why is my air conditioner not cooling?
Check if the filter is dirty, the exhaust hose is blocked or disconnected, the window is open, or the set temperature is too high. Also ensure the unit is on a hard, level surface.
Can I use an extension cord?
It is not recommended. Use a dedicated 15-amp circuit. If absolutely necessary, use a heavy-duty extension cord of 14-gauge or larger with a grounded plug.
User questions about FHCP061AKR FREONIC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air conditioner in PDF format for free! Find your manual FHCP061AKR - FREONIC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FHCP061AKR by FREONIC.