BCH-40G - Frying Pan Blodgett - Free user manual and instructions
Find the device manual for free BCH-40G Blodgett in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Commercial Gas Frying Pan (Griddle) |
| Brand | Blodgett |
| Model | BCH-40G |
| Dimensions (W x D x H) | 40.5" x 30.5" x 22.5" (102.9 x 77.5 x 57.2 cm) |
| Cooking Surface Dimensions | 36" x 24" (91.4 x 61.0 cm) |
| Weight | 215 lbs (97.5 kg) |
| Power Source | Natural Gas or Propane (convertible) |
| BTU Rating | 120,000 BTU/hr (35.2 kW) |
| Number of Burners | 4 |
| Cooking Surface Material | 21/8" thick polished steel griddle plate |
| Temperature Range | 200°F to 500°F (93°C to 260°C) |
| Ignition Type | Electronic ignition with standing pilot |
| Thermostat Control | Adjustable thermostat with 5°F increments |
| Safety Features | Thermocouple flame failure safety device, manual reset high limit |
| Construction | Stainless steel front, sides, and back; aluminized steel core |
| Legs | 6" adjustable stainless steel legs with bullet feet |
| Grease Management | Full-width front grease trough with removable grease drawer |
| Cleaning | Daily: scrape surface, wash with mild detergent; avoid abrasive cleaners |
| Warranty | 1 year limited parts and labor; 5 years on griddle plate |
| Accessories Included | Griddle scraper, grease drawer, burner adjustment tool |
| Certifications | ANSI/NSF 4, CSA, CE (for selected markets) |
Frequently Asked Questions - BCH-40G Blodgett
What type of gas does the BCH-40G use?
The BCH-40G is factory set for natural gas but can be converted to propane using the included conversion kit. Refer to the installation manual for proper conversion.
How do I clean the griddle surface?
After each use, allow the griddle to cool slightly, then scrape off food debris with the provided scraper. Wipe with a damp cloth and mild detergent; do not use abrasive cleaners or steel wool.
What is the temperature range of the griddle?
The thermostat controls allow you to set temperatures from 200°F to 500°F (93°C to 260°C), with a 5°F increment for precise cooking.
How do I light the pilot?
Turn the main gas valve off. Wait 5 minutes. Then turn the pilot valve to 'Pilot', press and hold the knob while using a long lighter. After the pilot ignites, continue holding for 30 seconds, then release.
Why won't the burners ignite?
Check that the main gas supply is on and the pilot is lit. Verify the thermocouple is clean and properly positioned. If the electronic ignition fails, refer to the troubleshooting section of the manual.
Can I use the griddle for both grease and non-grease items?
Yes, the full-width grease trough collects runoff. For non-grease items like pancakes, you may still get some condensate; clean the trough regularly.
What is the warranty coverage?
Blodgett offers 1 year limited parts and labor from installation. The griddle plate is covered for 5 years against burnout. Normal wear and cleaning are not covered.
How do I adjust the flame height?
Each burner has an air shutter valve. Loosen the locking screw and rotate the shutter to adjust the flame from yellow (too rich) to blue (proper). Tighten the screw afterward.
What are the electrical requirements?
The BCH-40G requires 120V, 60Hz, 2-amp electrical supply for the electronic ignition and lights. It must be properly grounded.
How often should I season the griddle?
Season the griddle before first use and whenever the surface becomes dull or sticky. Apply a thin layer of cooking oil, heat to 350°F, and let it polymerize. Repeat as needed.
User questions about BCH-40G Blodgett
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Frying Pan in PDF format for free! Find your manual BCH-40G - Blodgett and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BCH-40G by Blodgett.