MV-Mixer - Audio Mixer Saramonic - Free user manual and instructions
Find the device manual for free MV-Mixer Saramonic in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Compact Audio Mixer |
| Brand | Saramonic |
| Model | MV-Mixer |
| Dimensions (W x D x H) | Approx. 205 x 145 x 55 mm |
| Weight | Approx. 0.5 kg |
| Power Supply | DC 5V via USB-C or 2 x AA batteries |
| Number of Channels | 2 microphone/line inputs + 1 stereo line input |
| Microphone Input Type | XLR/TRS combo jacks with phantom power (+48V) |
| Outputs | 1 x 6.35 mm TRS headphone output, 1 x 3.5 mm line output |
| Frequency Response | 20 Hz - 20 kHz |
| Total Harmonic Distortion | <0.01% (typical) |
| Signal-to-Noise Ratio | >90 dB (typical) |
| Gain Range | Up to 60 dB per channel |
| Phantom Power | +48V switchable per channel |
| Built-in Effects | None (basic mixing only) |
| Bluetooth | No |
| USB Audio Interface | No (analog mixer only) |
| Construction Material | Metal chassis with plastic controls |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Humidity | <80% RH (non-condensing) |
| Included Accessories | USB-C cable, user manual |
| Cleaning | Wipe with dry soft cloth; avoid liquids |
| Safety | Do not expose to moisture or extreme temperatures |
| Spare Parts | Available via Saramonic service center |
| Repair | Contact authorized service provider |
Frequently Asked Questions - MV-Mixer Saramonic
How do I connect a microphone to the MV-Mixer?
Connect your microphone to an XLR/TRS combo input. If using a condenser mic, enable +48V phantom power using the switch on the corresponding channel.
Can I power the mixer via USB?
Yes, the MV-Mixer can be powered via the USB-C port with a 5V power source, such as a power bank or USB wall adapter.
What is the maximum input level?
The maximum input level before distortion varies by channel, but typically line inputs handle up to +10 dBu and microphone inputs up to -10 dBu at minimum gain.
Does the MV-Mixer have built-in effects?
No, the MV-Mixer is a basic analog mixer without built-in effects like reverb or echo. External effects can be connected via the line output.
How do I clean the mixer?
Use a soft, dry cloth to wipe the surface. Avoid using any liquids or cleaning agents. Keep connectors free of dust.
Can I use the mixer with a smartphone?
Yes, you can connect the 3.5 mm line output to a smartphone using an appropriate adapter, but note that the mixer is analog and requires a compatible input.
What is the weight of the MV-Mixer?
The mixer weighs approximately 0.5 kg (1.1 lbs), making it portable for on-the-go use.
Does it support Bluetooth?
No, the MV-Mixer does not have Bluetooth connectivity. It is a fully analog wired mixer.
How can I reduce noise in the audio?
Ensure all cables are balanced and properly connected. Use the gain knobs to set appropriate levels and avoid overdriving the inputs. Keep the mixer away from electromagnetic sources.
Where can I find spare parts?
Spare parts are available through Saramonic's official service centers. Contact their support or check the website for authorized repair options.
User questions about MV-Mixer Saramonic
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Audio Mixer in PDF format for free! Find your manual MV-Mixer - Saramonic and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MV-Mixer by Saramonic.
USER MANUAL MV-Mixer Saramonic
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Saramonic
Model : MV-Mixer
Category : Audio Mixer