61112 I WF - Dishwasher Arçelik - Free user manual and instructions
Find the device manual for free 61112 I WF Arçelik in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Built-in Dishwasher |
| Width | 60 cm |
| Height | 85 cm |
| Depth | 60 cm |
| Weight | 45 kg |
| Energy Efficiency Class | A++ |
| Annual Energy Consumption | 240 kWh |
| Annual Water Consumption | 2800 L |
| Number of Place Settings | 12 |
| Noise Level | 44 dB(A) |
| Number of Programs | 6 (Economy, Auto, Intensive, Quick, Glass, Pre-rinse) |
| Program Duration (Eco) | 195 min |
| Power Consumption (Off mode) | 0.5 W |
| Power Connection | 220-240 V, 50 Hz, 10 A |
| Water Connection | Cold water only |
| Salt and Rinse Aid Indicators | Yes |
| Child Lock | Yes, button combination |
| Adjustable Upper Basket | Yes, height adjustable |
| Cutlery Basket | Removable cutlery tray |
| Self-Cleaning Filter | Yes |
| Delay Start | Yes, up to 24 hours |
| Brand | Arçelik |
| Model | 61112 I WF |
Frequently Asked Questions - 61112 I WF Arçelik
How do I install the dishwasher?
Ensure the installation site has a water supply and drain connection. Level the dishwasher using the adjustable feet. For detailed steps, refer to the installation guide in the manual.
What type of detergent should I use?
Use a dishwasher detergent in powder, gel, or tablet form. For best results, choose a detergent with rinse aid and salt components. Follow the manufacturer's dosage instructions.
Why is my dishwasher not cleaning properly?
Check if the spray arms are blocked, the filter is clean, and the detergent dispenser is functioning. Ensure the water temperature is at least 50°C. Also, load dishes properly so water can reach all surfaces.
How do I clean the filter?
Remove the lower rack, twist the coarse filter counterclockwise, and lift it out. Rinse under running water. Remove the fine filter and microfilter, clean them, then reassemble. Do this regularly to maintain performance.
What does the E5 error code mean?
Error E5 indicates a water heating problem. The dishwasher cannot heat water properly. Check if the heating element is faulty or there's a control board issue. Contact an authorized service center for repair.
How much salt and rinse aid should I add?
Fill the salt reservoir with dishwasher salt until full (approx. 1 kg). For rinse aid, fill the dispenser until the indicator shows full. Adjust the rinse aid dosage setting (1-4) based on water hardness: 1 for soft water, 4 for hard.
Can I use regular dish soap?
No, regular dish soap creates excessive foam that can damage the dishwasher and cause leaks. Only use detergents specifically designed for automatic dishwashers.
How do I activate the child lock?
Press and hold the Start/Reset button for 3 seconds until the child lock icon appears on the display. To deactivate, repeat the same step. The lock prevents accidental button presses during the cycle.
What is the delay start feature?
The delay start allows you to set a timer for when you want the dishwasher to begin. Press the Delay Start button repeatedly to choose a delay from 1 to 24 hours. The cycle will start automatically after the selected delay.
How do I descale the dishwasher?
Use a descaling agent specifically for dishwashers. Empty the dishwasher, remove filters, pour the descaling solution into the detergent dispenser, and run a 65°C program without dishes. After cooling, run a rinse cycle.
User questions about 61112 I WF Arçelik
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual 61112 I WF - Arçelik and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 61112 I WF by Arçelik.