72325 - Uncategorized iPort - Free user manual and instructions
Find the device manual for free 72325 iPort in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Universal Mounting Bracket |
| Compatible Devices | Smartphones and Tablets up to 10 inches |
| Material | Aluminum alloy and ABS plastic |
| Dimensions (folded) | 120 x 80 x 30 mm (4.7 x 3.1 x 1.2 in) |
| Weight | 150 g (5.3 oz) |
| Mounting Options | Desk clamp, suction cup, and adhesive pad |
| Adjustment | 360° rotation, tilt angle -90° to +90° |
| Power Supply | None (passive mechanical device) |
| Key Functions | Secure grip, single-hand operation, cable management |
| Maintenance | Wipe with dry cloth; avoid liquid cleaners |
| Safety | Non-slip pads, locking mechanism, rated load 1 kg |
| Spare Parts | Replacement pads and clamp pads available |
| Reparability | Modular design; parts can be replaced by user |
| Warranty | 2 years limited manufacturer warranty |
| Package Contents | Mount, clamp, suction cup, adhesive pad, manual |
Frequently Asked Questions - 72325 iPort
How do I install the iPort 72325 on my desk?
Use the included desk clamp. Open the clamp wide enough to fit your desk edge (up to 5 cm thick), slide it on, and tighten the knob firmly. Ensure the rubber pads are in contact to avoid scratches.
Can I use this mount with a tablet case?
Yes, the mount has adjustable spring-loaded arms that can grip devices with a case up to 15 mm thick. For very bulky cases, remove the case for a secure fit.
How do I adjust the viewing angle?
The mount features a ball joint that allows 360° rotation and tilt. Simply move the device to the desired angle; the joint stays in place thanks to friction. For extra tightness, adjust the screw on the joint.
What is the maximum weight it can hold?
The rated load capacity is 1 kg (2.2 lbs). This covers most smartphones and tablets up to 10 inches. Exceeding this limit may cause instability or damage.
Does the mount work on glass or tiled surfaces?
The included suction cup adheres to smooth, non-porous surfaces like glass or tile. Clean the surface thoroughly before mounting. For rough or textured surfaces, use the adhesive pad instead.
How do I clean the mount?
Use a soft, dry cloth to wipe the mount. Avoid water, solvents, or abrasive cleaners as they may damage the plastic and rubber components.
Can I replace the rubber pads if they wear out?
Yes, replacement pads are available separately. The pads are removable and replaceable. Simply peel off the old pads and stick on new ones after cleaning the surface.
Is the mount compatible with my phone if it has a pop socket?
The mount grips the sides of your device, so a pop socket on the back does not affect compatibility. However, if the pop socket prevents the arms from closing fully, you may need a spacer or remove the pop socket temporarily.
How do I remove the mount from the suction cup?
Lift the release tab on the suction cup to break the seal, then gently pull the mount away. If stuck, use a thin plastic card to pry the edge.
What should I do if the mount becomes loose after some use?
Check all tightening screws and the clamp knob. Over time, vibrations may loosen them. Retighten gently. Also inspect the rubber pads for wear; replace if needed.
User questions about 72325 iPort
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual 72325 - iPort and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 72325 by iPort.
USER MANUAL 72325 iPort
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : iPort
Model : 72325
Category : Uncategorized