PLMRL50WB - Subwoofer Pyle - Free user manual and instructions
Find the device manual for free PLMRL50WB Pyle in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Powered Subwoofer |
| Brand | Pyle |
| Model | PLMRL50WB |
| RMS Power Output | 50 Watts |
| Peak Power Output | 100 Watts |
| Frequency Response | 30 Hz - 250 Hz |
| Impedance | 4 Ohms |
| Driver Size | 8 Inches |
| Enclosure Type | Bass Reflex (Ported) |
| Dimensions (W x H x D) | 11.5 x 12.5 x 11.5 Inches |
| Weight | 12.3 Pounds |
| Power Supply | AC 120V, 60Hz |
| Input Type | RCA Line Input |
| Phase Control | 0° / 180° Switch |
| Auto On/Off | Yes |
| Volume Control | Yes, Rear Panel Knob |
| Crossover Frequency | Adjustable 40 Hz - 200 Hz |
| Cabinet Material | MDF Wood |
| Grille | Removable Cloth Grille |
| Cleaning Instructions | Wipe with dry cloth; do not use solvents |
| Safety Precautions | Do not expose to water or excessive moisture |
Frequently Asked Questions - PLMRL50WB Pyle
What are the dimensions of the Pyle PLMRL50WB subwoofer?
The approximate dimensions are 11.5 x 12.5 x 11.5 inches (W x H x D). Always refer to the manual for exact measurements.
How do I connect the subwoofer to my receiver?
Use an RCA cable from the subwoofer output on your receiver to the RCA Line Input on the subwoofer. Ensure the subwoofer is powered on.
What is the power output of this subwoofer?
It has an RMS power output of 50 Watts and a peak power of 100 Watts.
Does the subwoofer have an auto on/off feature?
Yes, the subwoofer features an auto on/off function. It will power on automatically when it detects an audio signal and turn off after a period of inactivity.
Can I adjust the crossover frequency?
Yes, there is an adjustable crossover control on the rear panel, typically ranging from 40 Hz to 200 Hz.
What is the recommended placement for the subwoofer?
Place the subwoofer on a stable surface near a power outlet. Avoid corners to reduce boomy bass; a position 1/3 of the room length from a wall can provide balanced response.
How do I clean the subwoofer?
Wipe the exterior with a soft, dry cloth. Do not use liquid cleaners or solvents. Clean the grille with a vacuum on low suction.
What should I do if there is no sound from the subwoofer?
Check that the subwoofer is powered on and the volume is turned up. Verify the RCA cable connection. Ensure your receiver's subwoofer output is enabled. Also check the auto on/off status.
Is the subwoofer compatible with all receivers?
It is compatible with any receiver that has a subwoofer pre-out (RCA). Because it is a powered subwoofer, no external amplifier is needed.
What is the warranty on the Pyle PLMRL50WB?
Pyle typically offers a 1-year limited warranty. Contact Pyle customer support for details or visit their website.
User questions about PLMRL50WB Pyle
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Subwoofer in PDF format for free! Find your manual PLMRL50WB - Pyle and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PLMRL50WB by Pyle.
USER MANUAL PLMRL50WB Pyle
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Pyle
Model : PLMRL50WB
Category : Subwoofer