Deluxe CP18F30 - Air conditioner Friedrich - Free user manual and instructions
Find the device manual for free Deluxe CP18F30 Friedrich in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Through-the-wall air conditioner |
| Brand | Friedrich |
| Model | Deluxe CP18F30 |
| Cooling Capacity (BTU) | 18,000 BTU |
| Cooling Area (sq ft) | Up to 1,000 sq ft |
| Energy Efficiency Ratio (EER) | 12.1 EER |
| Electrical Requirements | 230V, 15A, 60Hz |
| Phase | Single phase |
| Plug Type | NEMA 6-15P |
| Dimensions (W x H x D) | 26.5 x 20 x 26 inches |
| Net Weight | 112 lbs |
| Refrigerant Type | R-410A |
| Operating Modes | Cool, Fan, Dry, Heat (Heat Pump) |
| Fan Speeds | 3 (Low, Medium, High) |
| Thermostat Control | Electronic with remote |
| Remote Control | Yes, with LCD display |
| Filter Type | Washable electrostatic filter |
| Noise Level (Indoor/Outdoor) | 56 dB / 64 dB |
| Installation Type | Through-wall (sleeve required) |
| Warranty | 5 years (compressor), 1 year (parts) |
Frequently Asked Questions - Deluxe CP18F30 Friedrich
What are the dimensions of the Friedrich Deluxe CP18F30?
The unit measures approximately 26.5 inches wide, 20 inches high, and 26 inches deep. Always verify with the installation manual for exact measurements.
How do I clean the filter?
Turn off the unit and unplug it. Remove the front grille, then slide out the filter. Wash the filter with lukewarm water and mild detergent, let it dry completely, and reinstall. Clean every two weeks during heavy use.
Does this model have a heat pump?
Yes, the CP18F30 is a heat pump model, providing both cooling and heating. It can operate in heat mode down to outdoor temperatures of about 30°F.
What type of electrical outlet is required?
This unit requires a dedicated 230V, 15A circuit with a NEMA 6-15P plug. Do not use an extension cord or adapter.
How do I set the timer?
Use the remote control: press the Timer button to set the desired on or off time. Adjust the time using the +/- buttons. The unit will automatically turn on or off at the set time.
What does the CP18F30 error code E5 mean?
Error code E5 indicates a communication error between the indoor and outdoor units. Check wiring connections and ensure the thermostat is properly connected. If the problem persists, contact a qualified technician.
Can I install this unit in a window?
No, this unit is designed for through-wall installation only. It requires a wall sleeve and must be installed by a professional. Window installation is not recommended and may void the warranty.
How do I use the dry mode?
Press the Mode button until the Dry icon appears on the display. In dry mode, the fan runs at low speed to remove excess humidity without overcooling. The unit will automatically stop when the desired humidity level is reached.
How often should I service the unit?
Clean the filter every two weeks. Have a professional inspect and clean the coils and drainage system annually. The refrigerant system is sealed and requires no routine maintenance.
What is the noise level?
The indoor unit operates at approximately 56 dB (medium speed), and the outdoor unit at about 64 dB. These levels are comparable to normal conversation or background music.
User questions about Deluxe CP18F30 Friedrich
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air conditioner in PDF format for free! Find your manual Deluxe CP18F30 - Friedrich and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Deluxe CP18F30 by Friedrich.
USER MANUAL Deluxe CP18F30 Friedrich
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Friedrich
Model : Deluxe CP18F30
Category : Air conditioner