ThinkServer sd350 - Server LENOVO - Free user manual and instructions
Find the device manual for free ThinkServer sd350 LENOVO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Rack Server |
| Brand | Lenovo |
| Model | ThinkServer sd350 |
| Form Factor | 2U Rack |
| Dimensions (W x D x H) | 482.6 mm x 733.4 mm x 86.1 mm |
| Weight | Approximately 18 kg |
| Power Supply | Dual redundant hot-swap power supplies, 550W each |
| Processor Support | Intel Xeon E5-2600 v3/v4 series |
| Memory | Up to 512 GB DDR4 ECC RDIMM |
| Storage | Up to 8 hot-swap 2.5" SATA/SAS hard drives |
| RAID Support | Hardware RAID 0,1,5,6,10 |
| Network | Dual Gigabit Ethernet ports |
| Expansion Slots | 3 PCIe 3.0 x8 slots |
| Remote Management | Lenovo XClarity support |
| Operating Temperature | 10°C to 35°C |
| Safety Certifications | UL, CE, FCC Class A |
| Clean the exterior with a dry cloth; avoid liquids. | Do not block airflow vents |
| Replaceable Parts | Hard drives, power supplies, fans, memory modules |
| Warranty | 3-year limited warranty |
Frequently Asked Questions - ThinkServer sd350 LENOVO
How do I install the ThinkServer sd350 into a rack?
Use the included rack mounting kit. Ensure the rails are securely attached to the server sides and rack posts. Slide the server in and tighten the screws.
What type of memory is compatible?
DDR4 ECC RDIMMs, speeds up to 2400 MHz. Mixing different capacities is not recommended.
How to reset the administrator password?
Clear the CMOS jumper on the motherboard (refer to manual for exact location). Alternatively, use Lenovo XClarity to reset.
Can I use SATA drives instead of SAS?
Yes, but they will be limited to SATA speed. Mixing with SAS is not supported in a single RAID array.
How to update the firmware?
Download the latest firmware from Lenovo support site. Use the UpdateXpress tool or Lenovo XClarity for automated updates.
What is the maximum power consumption?
Typically around 800W under full load with a 550W power supply. Actual consumption depends on configuration.
How do I configure RAID?
Enter the RAID BIOS during boot (Ctrl+R). Use the web interface or specific key to create RAID arrays.
How to replace a failed hard drive?
Locate the failed drive via indicator light. Press the release button and pull the tray out. Insert a new drive of same type and capacity.
What does the warning LED mean?
It indicates a hardware fault. Check system event log via Lenovo XClarity or front panel display for details.
How to clean the server?
Power down and unplug. Use compressed air to blow dust from fans and heatsinks. Wipe exterior with a dry microfiber cloth.
User questions about ThinkServer sd350 LENOVO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual ThinkServer sd350 - LENOVO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ThinkServer sd350 by LENOVO.