L7FNC48S - Washing machine AEG - Free user manual and instructions

Product Type	Freestanding Washing Machine
Capacity	7 kg
Maximum Spin Speed	1400 rpm
Energy Class	A (A+++ - D scale)
Wash Noise Level	51 dB
Spin Noise Level	77 dB
Dimensions (H x W x D)	850 x 600 x 600 mm
Weight	75 kg
Number of Programs	15
Display Type	LED
Smart Technology	ProSense® Technology
Water Protection	AquaControl System
Drum Material	Stainless Steel
Motor Type	Inverter Motor
Child Lock	Yes
Delay Start	Up to 20 hours
Self-Cleaning	Drum Cleaning Program
Energy Consumption per Cycle	0.85 kWh (Eco 40-60)
Water Consumption per Cycle	49 L (Eco 40-60)

Frequently Asked Questions - L7FNC48S AEG

How do I start a wash cycle?

Load laundry, add detergent, close the door, select a program using the dial, and press the Start/Pause button.

How can I clean the drum?

Run a Drum Cleaning program with an empty drum and a descaling agent or use a hot wash cycle with a cleaning tablet.

What does ProSense technology do?

ProSense automatically adjusts the wash time and water consumption based on the load size, saving energy and protecting fabrics.

How do I install the washing machine?

Remove transport bolts, level the feet, connect water inlet hose to a tap with 3/4'' thread, and plug into a grounded outlet. Ensure minimum water pressure of 1 bar.

What should I do if the machine vibrates excessively?

Check that all transport bolts are removed, the machine is leveled with adjustable feet, and the floor is stable. Uneven loads can also cause vibration.

How do I clean the detergent drawer?

Remove the drawer by pressing the release button, rinse it under warm water, and clean the compartment with a brush. Wipe dry before reinserting.

What to do if the machine does not drain?

Check the drain hose for kinks or clogs, clean the drain pump filter located at the bottom front, and ensure the drain pipe is not blocked.

How to use the Delay Start function?

Select a program, press the Delay Start button repeatedly to set the desired delay (1-20 hours), then press Start/Pause. The machine will finish at the set time.

How do I maintain the door seal?

Regularly wipe the rubber gasket with a damp cloth and dry it. Remove any trapped coins or debris to prevent mold and ensure a proper seal.

Where can I find the model and serial number?

The rating plate is located on the front edge of the door opening or on the back panel. It contains the model number (L7FNC48S) and serial number.

USER MANUAL L7FNC48S AEG

8,0 kg

3:20

43 L

A B C D E F G

ABCD