9554 - Fan Lasko - Free user manual and instructions
Find the device manual for free 9554 Lasko in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Floor Fan |
| Brand | Lasko |
| Model | 9554 |
| Dimensions (H x W x D) | 36 x 18 x 18 inches |
| Weight | 10.5 lbs |
| Power Supply | 120V AC, 60 Hz |
| Power Consumption | 60 Watts |
| Number of Speed Settings | 3 (Low, Medium, High) |
| Oscillation | Yes, wide-angle |
| Control Type | Manual rotary knobs |
| Gril Material | Metal with powder coat finish |
| Blade Material | Plastic |
| Adjustable Tilt | Yes, up/down adjustment |
| Safety Feature | Tip-over automatic shut-off |
| Overheat Protection | Yes, thermal fuse |
| Cleaning Instructions | Unplug, wipe grille with damp cloth; do not immerse |
| Replacement Parts Available | Fuse, power cord, motor assembly (contact Lasko support) |
| Certifications | ETL listed |
| Warranty | 1-year limited |
Frequently Asked Questions - 9554 Lasko
How to clean the Lasko 9554 fan?
Unplug the fan. Use a soft damp cloth to wipe the grille and housing. Do not use abrasive cleaners or immerse in water. For deep cleaning, remove the front grille (if possible) and wipe blades.
Does the fan have a remote control?
No, the Lasko 9554 is manually operated with rotary knobs for speed and oscillation. No remote is included.
How to adjust the oscillation?
Press the oscillation knob (usually on the motor housing) to start or stop oscillation. The fan will sweep side to side until the knob is pushed again.
What is the noise level of this fan?
The Lasko 9554 operates at a moderate noise level suitable for background use. On low speed it is quiet; on high speed it is more audible but still manageable.
Can I use the fan outdoors?
No, this fan is designed for indoor use only. Exposure to moisture or extreme temperatures may cause electrical hazards.
How to assemble the fan?
Typically, the fan comes partially assembled. Attach the base to the pole, slide the motor unit onto the pole, and screw on the front grille. Refer to the manual for exact steps.
The fan stopped working, what should I check?
First, check if it is plugged in and the outlet works. Ensure the thermal fuse has not tripped. If the fan tipped over, reset it upright. If still not working, contact Lasko support.
Can I use an extension cord?
It is not recommended. If necessary, use a heavy-duty cord rated for at least 10 amps and keep it as short as possible to avoid voltage drop.
How to replace the fuse?
Unplug the fan. Locate the fuse holder on the plug or inside the motor housing. Remove the old fuse and insert a new one of the same rating (usually 2.5A). Reassemble and test.
Is the fan energy efficient?
Yes, the Lasko 9554 uses about 60 watts on high speed, which is low compared to air conditioners. It is a cost-effective way to stay cool.
User questions about 9554 Lasko
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Fan in PDF format for free! Find your manual 9554 - Lasko and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 9554 by Lasko.