PixelPro ZS1-1DS - Security Camera Ganz - Free user manual and instructions
Find the device manual for free PixelPro ZS1-1DS Ganz in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | IP Security Camera |
| Model | PixelPro ZS1-1DS |
| Brand | Ganz |
| Image Sensor | 1/3" Progressive Scan CMOS |
| Resolution | 1.3 Megapixels (1280 x 1024) |
| Lens Type | Varifocal, 2.8-12mm |
| IR Range | Up to 30 meters |
| Day/Night | Yes, with IR cut filter |
| Weather Rating | IP67 (outdoor) |
| Dimensions (W x H x D) | 70 x 70 x 150 mm |
| Weight | Approx. 0.5 kg |
| Power Supply | 12V DC / PoE (IEEE 802.3af) |
| Power Consumption | Max 7W |
| Video Compression | H.264, MJPEG |
| Frame Rate | Up to 30 fps at all resolutions |
| Network Interface | 10/100 Base-T Ethernet |
| Protocols | IPv4, IPv6, TCP/IP, UDP, HTTP, HTTPS, FTP, SMTP, NTP, DNS, DHCP, DDNS, UPnP, RTSP, RTP, RTCP, IGMP, ONVIF Profile S |
| Motion Detection | Yes |
| Privacy Masking | Yes, up to 4 zones |
| Audio | Two-way audio (built-in mic & speaker) |
| Alarm I/O | 1 input / 1 output |
| Operating Temperature | -20°C to 50°C |
| Maintenance | Clean the lens with a soft, dry cloth. Avoid using harsh chemicals. |
| Safety | Ensure proper grounding and use only the specified power adapter. Consult the manual for full safety instructions. |
Frequently Asked Questions - PixelPro ZS1-1DS Ganz
How do I reset the camera to factory defaults?
Press and hold the reset button on the camera for about 10 seconds using a paperclip until the LED blinks rapidly. The camera will reboot with default settings.
What is the default IP address of the camera?
The default IP address is 192.168.1.108. Ensure your computer is on the same subnet to access the web interface.
Can I mount the camera on a ceiling?
Yes, the camera comes with a mounting bracket suitable for wall or ceiling installation. Use the included screws and anchors for secure mounting.
How do I enable motion detection alerts?
Log in to the camera's web interface, go to Events > Motion Detection, enable it, and set sensitivity. Configure email or FTP alerts under Event Server.
Does the camera support PoE?
Yes, the camera supports PoE (Power over Ethernet) IEEE 802.3af. Connect it directly to a PoE switch or injector for both power and data.
What should I do if the camera loses video feed?
Check the network connection and power supply. Verify that the cable is properly connected. Restart the camera and check if the IP address is accessible from your network.
How do I update the camera firmware?
Download the latest firmware from the Ganz website. Access the camera's web interface, go to Maintenance > Upgrade, and upload the firmware file. Do not power off during update.
Can I view the camera feed on my smartphone?
Yes, download the Ganz mobile app (e.g., Ganz NVR or compatible ONVIF app). Add the camera by scanning its QR code or entering the IP address and credentials.
What is the maximum supported SD card size?
The camera supports microSD cards up to 128 GB (Class 10 or higher). Insert the card into the slot located under the housing cover.
How do I set a static IP address for the camera?
Access the camera's web interface via its current IP, go to Network > TCP/IP, disable DHCP, and enter your desired static IP, subnet mask, gateway, and DNS.
User questions about PixelPro ZS1-1DS Ganz
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual PixelPro ZS1-1DS - Ganz and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PixelPro ZS1-1DS by Ganz.
USER MANUAL PixelPro ZS1-1DS Ganz
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Ganz
Model : PixelPro ZS1-1DS
Category : Security Camera