C9650HN - Printer OKI - Free user manual and instructions
Find the device manual for free C9650HN OKI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Color LED Printer |
| Model | C9650HN |
| Print Speed (Color) | Up to 40 ppm |
| Print Speed (Monochrome) | Up to 50 ppm |
| Resolution | 1200 x 1200 dpi |
| Duplex Printing | Automatic |
| Network Connectivity | Ethernet 10/100/1000 Base-T, USB 2.0 |
| Supported Media Sizes | A3, A4, A5, B4, B5, Legal, Letter, Custom |
| Paper Input Capacity | Standard 530 sheets, optional up to 2,760 sheets |
| Standard Memory | 512 MB (expandable to 1 GB) |
| Display | Color LCD touch panel |
| Dimensions (W x D x H) | 26.8 x 21.0 x 17.2 in (680 x 533 x 437 mm) |
| Weight | Approximately 220 lbs (100 kg) |
| Power Consumption (Typical) | 800 W (operating), 45 W (standby) |
| Monthly Duty Cycle | Up to 100,000 pages |
| Warm-up Time | Less than 60 seconds from power on |
| Toner Cartridges | OKI 43315103 series (Cyan, Magenta, Yellow, Black) |
| Drum Life | Approximately 40,000 pages per drum (color and mono) |
| Maintenance | Replace toner and drum units as needed; clean LED head with swab |
| Safety Certifications | Energy Star, UL, FCC Class A |
| Warranty | One year on-site limited warranty |
Frequently Asked Questions - C9650HN OKI
How do I replace the toner cartridge on my OKI C9650HN?
Open the front cover, then the top cover. Press the release lever on the old toner cartridge and pull it out. Unpack the new cartridge, shake it gently side to side, and insert it until it clicks into place. Close all covers. The printer will automatically reset. Always use OKI genuine toner cartridges to avoid print quality issues.
How do I clear a paper jam in the OKI C9650HN?
First, turn off the printer. Open the top cover and inspect the fuser area. Remove any jammed paper gently, pulling in the direction of paper travel. Also check the bypass tray and output tray. Ensure no torn pieces remain. Close the cover and turn the printer back on. Do not use excessive force when removing paper to avoid damage.
How do I set up the OKI C9650HN on a network?
Connect the printer to your network using an Ethernet cable. On the printer’s control panel, go to Network Settings and enable DHCP or set a static IP address. Install the printer driver on your computer and select the network port. You can also use the OKI Smart Print Manager for easy configuration.
What type of paper does the OKI C9650HN support?
The printer supports a wide range of media including plain paper, bond, envelopes, labels, and cardstock. It handles sizes from A3 to A5 and custom sizes. For best results, use 80-90 gsm plain paper for everyday printing and adjust the media type setting in the driver accordingly.
How do I perform a calibration on the OKI C9650HN?
From the control panel, navigate to Maintenance > Color Calibration. Select Auto Calibration to correct color registration and density. The printer will print a test pattern and adjust automatically. Calibration is recommended after changing toner or drum to ensure color accuracy.
How do I replace the drum unit in my OKI C9650HN?
Open the top cover and locate the drum unit (four drums for CMYK). Press the green lever, lift the drum out by its handle. Unpack the new drum, remove protective materials, and slide it into the slot until it locks. Close the cover. The printer will prompt to replace the toner or run a setup if needed. Always handle drums by the ends to avoid touching the drum surface.
How do I clean the LED head on the OKI C9650HN?
Turn off the printer and open the top cover. Use a lint-free cloth slightly dampened with isopropyl alcohol. Gently wipe the LED head lens array (the long bar) in one direction. Allow it to dry completely before closing. Clean the LED head if you notice vertical streaks or faded areas on prints.
What does the 'Service Call' error mean on the OKI C9650HN?
A 'Service Call' error indicates a critical hardware issue, such as a fuser failure or motor problem. Turn off the printer, wait 30 seconds, and turn it back on. If the error persists, contact OKI technical support. Do not attempt to disassemble the printer yourself as it may void the warranty.
How do I update the firmware on my OKI C9650HN?
Download the latest firmware from the OKI support website. Transfer the firmware file to a USB flash drive. Insert the USB drive into the printer’s USB port. Go to Menu > Maintenance > Firmware Update and follow the on-screen instructions. Do not power off the printer during the update to avoid damage.
Why are my prints coming out with horizontal lines?
Horizontal lines are often caused by a dirty LED head, worn drum, or low toner. First, clean the LED head as described. If lines persist, check the toner level and replace the corresponding color cartridge. If still present, replace the drum unit. Running a partial cleaning cycle from the maintenance menu may also help.
User questions about C9650HN OKI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Printer in PDF format for free! Find your manual C9650HN - OKI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. C9650HN by OKI.
USER MANUAL C9650HN OKI
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : OKI
Model : C9650HN
Category : Printer