PSU10-EU - Effect pedal BEHRINGER - Free user manual and instructions
Find the device manual for free PSU10-EU BEHRINGER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Power Supply for Effect Pedals |
| Brand | Behringer |
| Model | PSU10-EU |
| Number of Outputs | 10 |
| Output Voltage | 9V DC |
| Output Current per Output | 500 mA |
| Total Output Current | 5000 mA (5 A) |
| Input Voltage | 100-240V AC, 50/60Hz |
| Dimensions (W x D x H) | 200 x 120 x 50 mm |
| Weight | 0.5 kg |
| Power Cord Length | 1.5 m |
| Protection | Overcurrent, short circuit, surge protection |
| LED Indicators | Power on and per output status |
| Output Isolation | Isolated outputs to minimize noise |
| Compatibility | Most 9V DC effect pedals with center negative polarity |
| Housing Material | Metal chassis |
| Color | Black |
| Mounting | Desktop or pedalboard placement |
| Included Accessories | Power cord, 10 DC cables, user manual |
Frequently Asked Questions - PSU10-EU BEHRINGER
What is the Behringer PSU10-EU?
The Behringer PSU10-EU is a 10-output isolated power supply designed to power multiple effect pedals. It provides 9V DC at 500 mA per output, ensuring clean and reliable power.
Is the PSU10-EU compatible with all effect pedals?
It is compatible with most 9V DC effect pedals that have center-negative polarity. However, always check your pedal's voltage and current requirements. Pedals requiring more than 500 mA should not be used on a single output.
Can I power pedals that need more than 500 mA?
No, each output is limited to 500 mA. If a pedal requires higher current, use a dedicated power supply or a different output with sufficient capacity. Do not exceed the total output of 5 A.
Does the PSU10-EU have surge protection?
Yes, it includes built-in overcurrent, short circuit, and surge protection to safeguard your pedals from power fluctuations.
How do I connect my pedals to the PSU10-EU?
Use the included DC cables. Plug one end into the pedal and the other into any output on the PSU10-EU. Ensure the polarity matches (center negative). Then connect the power cord to an AC outlet.
What is the input voltage range for the PSU10-EU?
It accepts 100-240V AC at 50/60Hz, making it suitable for use worldwide with the appropriate power cord or plug adapter.
Are the outputs isolated from each other?
Yes, each output is individually isolated, which helps prevent ground loops and reduces noise, hum, and interference between connected pedals.
What do the LED indicators on the unit mean?
The power LED lights up when the unit is on. Each output has its own LED that indicates active power delivery. If an LED is off, check the connection or the pedal.
Can I daisy chain pedals from a single output?
It is not recommended. Using daisy chains can exceed the current limit and introduce noise. Each output is designed for one pedal. Use separate outputs for each pedal.
What should I do if a pedal stops working while connected?
First, check if the output LED is lit. If not, try a different output or cable. Verify the pedal's power requirements and polarity. If the unit is overloaded, disconnect some pedals. If problems persist, consult the manual or contact support.
User questions about PSU10-EU BEHRINGER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Effect pedal in PDF format for free! Find your manual PSU10-EU - BEHRINGER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PSU10-EU by BEHRINGER.
USER MANUAL PSU10-EU BEHRINGER
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BEHRINGER
Model : PSU10-EU
Category : Effect pedal