AP42 - Microphone Audix - Free user manual and instructions
Find the device manual for free AP42 Audix in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Dynamic Microphone |
| Polar Pattern | Cardioid |
| Frequency Response | 50 Hz - 18 kHz |
| Impedance | 300 ohms |
| Connector | 3-pin XLR |
| Weight | 0.3 kg (10.6 oz) |
| Dimensions | 185 mm x 50 mm (7.3 in x 2.0 in) |
| Power Requirement | Passive (no battery required) |
| Sensitivity | 1.8 mV/Pa @ 1 kHz |
| Maximum SPL | ≥140 dB |
| On/Off Switch | None (always on) |
| Included Accessories | Microphone clip, carrying pouch |
| Cleaning Instructions | Wipe with damp cloth; do not immerse in water |
| Safety | Avoid dropping; store in dry place |
| Repairability | No user-serviceable parts; contact Audix service |
Frequently Asked Questions - AP42 Audix
How do I connect the AP42 microphone?
Connect the XLR cable to the microphone and plug the other end into a mixer or audio interface with phantom power (not required for dynamic mics).
Does the AP42 need phantom power?
No, the AP42 is a dynamic microphone and does not require phantom power. It works with any standard XLR input.
What is the polar pattern of the AP42?
The AP42 has a cardioid polar pattern, which picks up sound from the front and rejects noise from the sides and rear.
How do I clean the AP42 microphone?
Use a damp cloth to wipe the body. Avoid getting moisture into the grille. For the grille, gently brush with a soft brush.
Can I use the AP42 for instruments?
Yes, the AP42 is versatile and can be used for vocals and instruments like guitar amps and drums.
What type of cable does the AP42 use?
It uses a standard 3-pin XLR cable. Balanced cables are recommended for longer runs.
Is the AP42 a condenser or dynamic mic?
It is a dynamic microphone, known for durability and handling high sound pressure levels.
How do I reduce feedback with the AP42?
Position the microphone close to the sound source and point the rear of the microphone away from monitors to minimize feedback.
What is the frequency response of the AP42?
The frequency response is 50 Hz to 18 kHz, providing clear vocals with a slight presence boost.
Does the AP42 come with a warranty?
Yes, Audix offers a 5-year warranty against defects in materials and workmanship.
User questions about AP42 Audix
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Microphone in PDF format for free! Find your manual AP42 - Audix and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AP42 by Audix.