VS2-NET - Uncategorized Panduit - Free user manual and instructions
Find the device manual for free VS2-NET Panduit in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Device (Uncategorized) |
| Brand | Panduit |
| Model | VS2-NET |
| Dimensions (H x W x D) | 1.75 in x 17.5 in x 12 in (44 mm x 445 mm x 305 mm) |
| Weight | 5.5 lb (2.5 kg) |
| Power Supply | 100-240 V AC, 50-60 Hz, 0.5 A |
| Power Consumption | 30 W (max) |
| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
| Storage Temperature | -20°C to 70°C (-4°F to 158°F) |
| Humidity Operating | 10% to 90% non-condensing |
| Main Functions | Network connectivity, signal distribution, cable management |
| Ports | 24 x RJ45, 2 x SFP |
| LED Indicators | Power, Link/Act, Speed |
| Mounting | 19-inch rackmount, 1U |
| Cooling | Fanless, passive cooling |
| Maintenance | Clean with dry cloth; no internal user-serviceable parts |
| Safety | Use only with grounded outlets; avoid exposure to liquids |
| Spare Parts & Repairability | Replacement power supply available; repairs by qualified personnel only |
| General Information | Country of origin: China; warranty: 5 years |
| Included Accessories | Power cord, rackmount brackets, user manual |
Frequently Asked Questions - VS2-NET Panduit
How do I install the Panduit VS2-NET?
Install the device in a standard 19-inch rack using the included brackets. Connect the power cord and network cables. Refer to the manual for detailed steps.
What is the default IP address of the VS2-NET?
The default IP address is typically 192.168.1.100. Check the label on the device or the manual to confirm.
How do I reset the VS2-NET to factory defaults?
Press and hold the reset button on the front panel for 10 seconds using a paperclip. The device will reboot with factory settings.
Is the VS2-NET compatible with PoE?
The VS2-NET supports PoE+ (Power over Ethernet) on ports 1-16, providing up to 30W per port.
What is the power consumption of the VS2-NET?
Maximum power consumption is 30W under full load. It operates on 100-240V AC.
How do I update the firmware on the VS2-NET?
Download the latest firmware from the Panduit website. Access the web interface, go to Administration > Firmware Upgrade, and upload the file.
Can the VS2-NET be wall-mounted?
The device is designed for rackmount only. Wall-mounting is not supported due to ventilation requirements.
What type of Ethernet cable should I use?
Use Cat6 or higher shielded cable for optimal performance. Unshielded cable may cause interference.
How do I troubleshoot if the device is not powering on?
Check the power cord connection, ensure the outlet is working, and verify the voltage. If the LED is off, contact support.
Where can I find the user manual?
The user manual is available for free download on notice-facile.com or the Panduit official website.
User questions about VS2-NET Panduit
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual VS2-NET - Panduit and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VS2-NET by Panduit.
USER MANUAL VS2-NET Panduit
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Panduit
Model : VS2-NET
Category : Uncategorized