WA 1269 - Washing machine FRIAC - Free user manual and instructions
Find the device manual for free WA 1269 FRIAC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Washing machine |
| Brand | FRIAC |
| Model | WA 1269 |
| Capacity | 7 kg |
| Dimensions (H x W x D) | 85 x 60 x 60 cm |
| Weight | 68 kg |
| Power Supply | 230 V, 50 Hz |
| Energy Efficiency Class | A++ |
| Spin Speed | 1200 rpm |
| Number of Programs | 15 |
| Water Consumption per Cycle | 50 L |
| Noise Level (Wash) | 52 dB |
| Noise Level (Spin) | 76 dB |
| Control Type | Electronic |
| Display | LED |
| Safety Features | Child lock, overflow protection |
| Drum Material | Stainless steel |
| Door Opening Angle | 180 degrees |
| Recommended Detergent | High-efficiency (HE) detergent |
| Maintenance | Clean filter regularly, descale every 3 months |
| Spare Parts Availability | Contact FRIAC or authorized service |
| Repairability | Modular design for easy repair |
| Warranty | 2 years |
| Manual Format | PDF (free download) |
Frequently Asked Questions - WA 1269 FRIAC
How do I install the washing machine?
Ensure the machine is on a level, firm surface. Remove transit bolts before use. Connect water inlet hose to a tap with a pressure of 0.5-8 bar. Connect drain hose to a standpipe or sink. Plug into a grounded 230V outlet.
Why is my washing machine not starting?
Check if the door is properly closed and the child lock is off. Ensure the water supply is turned on and the power cord is plugged in. Also verify the cycle selector is in a valid position.
How often should I clean the filter?
Clean the drain filter every 3 months or when the machine displays a filter cleaning indicator. This prevents clogs and ensures proper drainage.
What should I do if the machine shows an error code?
Refer to the manual for specific error codes. Common codes: E01 (door lock), E02 (water supply). Try restarting the machine. If persistent, contact FRIAC support.
Can I use liquid detergent instead of powder?
Yes, but use the correct compartment. For liquid detergent, pour it into the designated liquid chamber or use a detergent dispenser ball. Avoid overdosing to prevent excessive foam.
How do I descale the washing machine?
Run a hot cycle (60°C or above) with a descaling agent or a cup of white vinegar. Repeat every 3 months to remove lime scale and maintain performance.
What is the maximum load for the WA 1269?
The maximum load is 7 kg of dry laundry. Overloading can reduce washing efficiency and cause excess vibration.
Why is there water left in the door seal after a cycle?
Some water in the door seal gasket is normal. Wipe it dry after each use to prevent mold and odors. Also clean the filter drain to ensure complete drainage.
How do I change the spin speed?
Select the desired program, then press the Spin Speed button to cycle through available speeds (e.g., 0, 400, 800, 1200 rpm). Note: not all programs allow all speeds.
Where can I find spare parts?
Spare parts are available through FRIAC's official website or authorized service centers. Common parts: drain pump, door seal, control board. Use original parts for safety.
User questions about WA 1269 FRIAC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Washing machine in PDF format for free! Find your manual WA 1269 - FRIAC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WA 1269 by FRIAC.
USER MANUAL WA 1269 FRIAC
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : FRIAC
Model : WA 1269
Category : Washing machine