HCE2500 - Pressure washer Workzone - Free user manual and instructions

Product Type	Pressure Washer
Brand	Workzone
Model	HCE2500
Maximum Pressure	2500 PSI (172 bar)
Flow Rate	1.5 GPM (5.7 L/min)
Power Source	Electric (120V / 60 Hz)
Motor Type	Universal (brushed)
Power Rating	1800 Watts
Dimensions (L x W x H)	16 x 12 x 18 inches (406 x 305 x 457 mm)
Weight	25 lbs (11.3 kg)
Hose Length	25 ft (7.6 m)
Power Cord Length	35 ft (10.7 m)
Nozzle Types	Adjustable spray (0° – 60°), turbo nozzle, soap nozzle
Detergent Tank	Integrated 0.5 L tank
Water Inlet	Garden hose connection
Safety Features	Gun lock, automatic shut-off, GFCI plug
Maintenance Required	Clean filter, check oil (if applicable), winterize
Accessories Included	Spray gun, lance, nozzles, foam cannon, quick-connect adapters
Warranty	1 year limited
User Manual	Available for free download in PDF

Frequently Asked Questions - HCE2500 Workzone

How do I start the pressure washer?

Connect the garden hose, turn on the water supply, plug the unit into a GFCI outlet, press the power switch, and squeeze the trigger gun. Never run the pump without water.

What type of detergent can I use?

Use only biodegradable detergents designed for pressure washers. Avoid bleach or solvents. The foam cannon mixes detergent automatically at low pressure.

How do I change the nozzle?

Pull back the collar on the lance, insert the desired nozzle, and release the collar to lock it. Always turn off the pressure washer and release pressure before changing nozzles.

Why is there no water coming out?

Check that the garden hose is fully turned on, the inlet filter is not clogged, and the hose has no kinks. If the unit has been sitting, prime the pump by pulling the trigger without the engine running.

How do I store the pressure washer?

Disconnect hoses, drain water from the pump and hoses, and store in a frost-free location. For winter, use pump antifreeze or follow the winterization procedure in the manual.

Can I use an extension cord?

Yes, but use a heavy-duty extension cord rated for the amperage (at least 14 AWG) and keep it as short as possible. Always use a GFCI-protected outlet.

How often should I change the oil?

This model has an electric motor; no oil change needed. For the pump, check the manual: some pumps are sealed, others require oil changes every 50 hours. Refer to the user manual for specifics.

What does the 'total stop' feature do?

The Total Stop System (TSS) turns off the motor when the trigger is not squeezed, saving energy and reducing wear. It restarts automatically when the trigger is pulled.

Why is the pressure fluctuating?

Fluctuating pressure can be due to air in the system, a clogged nozzle, or low water supply. Bleed air by squeezing the trigger without the motor running, clean the nozzle with the pin tool, and ensure full water flow.

Can I repair the pressure washer myself?

Basic maintenance like cleaning filters and nozzles is user-friendly. For pump repairs or electrical issues, contact a qualified technician to avoid injury and voiding the warranty. Always unplug before servicing.

USER MANUAL HCE2500 Workzone

ALDI guarantees that our exclusive brand products are developed to our stringent quality specifications. If you are not entirely satisfied with this product, please return it to the nearest as in store within 50 days from the date of purchase, for a full refund or replacement, or take advantage of our after sales support by calling the supplier's Customer Service Hotline.

Made in China

WORKZONE® is a registered trademark of ALDI Stores

DISTRIBUTED

ALDI STORES

NANCHINBURY,NS

www.sidi.com.au

AFTER SALES SUPPORT
	W
1300 855 [e-mail]
NOTI:HO22100	24/2019

YEARS WARRANTY

WORKZONE

HIGH PRESSURE WASHER

Original Instructions

Contents

overview....04
Contents of Box 06
explanation of symbols 07
Introduction 08
Laydon....09 Figure of delivery. 10
intended use....11
Safety regulations 11
Technical data 17 Reinforcing the machine
Assembly 18
Before operation 19
Operation 21 Unimproved and clearing
Troubleshooting 23
Storage 24
disposal and recycling....74
repair and refurbished goods or parts notice 26

Dec. 15th, 15th

456

Contents of Box

1 x High pressure washer
1 x. Handle with holder for high pressure hose
1x High pressure hence
1x Holder for mains cable
1x Lance holder
1x Nozzle cleaning needle
1x Quick correction
1x Extension
1x Can
1x Variance nozzle
1x Turbo nozda
1x 90° Turbo nozzle
1x Brush
1x Fram zeiyum
2x Screw
108 - Wally Family Medicine

Explanation of Symbols

	General note! Observe and understand all safety notes and hints in this manual.
	Read the operating instructions to reduce the risk of injury.
	Wear safety goggles.
	Wear ear-muffs. The impact of noise can cause damage to hearing.
	This high pressure washer is not suitable for connecting to the drinking water network.
	Warning! High-pressure jets can be dangerous if not used properly. Do not direct the jet at persons, animals, live electrical equipment or the pressure washer itself.
	Warning! Before installation, cleaning, alterations, maintenance, storage and transport switch off the high pressure washer and disconnect it from the power supply.
	Class II symbol: This high pressure washer is designed with dual insulation and does not need to be connected to an earthed power socket.
⚠ Attention!	Contents that provide information concerning your safety
⚠ Caution!	Failure to follow these instructions may cause risk of injury!
⚠ Warning!	Failure to follow these instructions may cause danger to life or danger of serious injuries!

I. Introduction

Congratulations on choosing to buy a WORKZONE ^® product.

All products brought to you by WORKZONE ^® are manufactured to the highest standards of performance and safety, and as part of our philosophy of customer service and satisfaction, are backed by our comprehensive 5 Year Warranty.

We hope you will enjoy using your purchase for many years to come.

Note:

According to the applicable product liability law the manufacturer of this high pressure washer is not liable for damages which arise on or in connection with this high pressure washer in case of:

• improper handling,
  • non-compliance with the instructions for use,
  • repairs by third party, non-authorised skilled workers,
• installation and replacement of non-original spare parts,
• improper use,
• failures of the electrical system due to the non-compliance with the electrical specifications and the Australian regulations.

Recommendations:

Read the entire text of the operating instructions prior to the assembly and operation of the high pressure washer.

These operating instructions are intended to make it easier for you to get familiar with your high pressure washer and utilise its intended possibilities of use.

The operating instructions contain important notes on how to work safely, properly and economically with your high pressure washer and how to avoid dangers, save repair costs, reduce downtime, and increase the reliability and working life of the high pressure washer.

In addition to the safety regulations contained herein, you must in any case comply with the applicable regulations of your country with respect to the operation of the high pressure washer.

Put the operating instructions in a clear plastic folder to protect them from dirt and humidity, and store them near the high pressure washer. The instructions must be read and carefully observed by each operator prior to starting the work. Only persons who have been trained in the use of the high pressure washer and have been informed on the related dangers and risks are allowed to use the high pressure washer. The required minimum age of 16 years must be met.

In addition to the safety notes contained in the present operating instructions and the special regulations of your country, the generally recognised technical rules for the operation of this high pressure washer must be observed.

II. Layout (Fig. 1/1.1)

1 Handle with holder for high pressure hose
2 High pressure hose
3 Holder for mains cable
4 On / off switch
5 Connection for high pressure hose
6 Lance holder
7 Accessories holder
8 Transport wheel
9 Water inlet connection
10 750ml Foam sprayer
11 Nozzle cleaning needle
12 Quick connector
13 Extension
14 Gun
15 Variable nozzle
16 Turbo nozzle
17 90° Turbo nozzle
18 Brush
19 Screw

III. Scope of delivery

High pressure washer (1x)

Handle with holder for high pressure hose (1x)

High pressure hose (1x)

Holder for mains cable (1x)

Lance holder (1x)

Nozzle cleaning needle (1x)

Quick connector (1x)

Extension (1x)

Gun (1x)

Variable nozzle (1x)

Turbo nozzle (1x)

90° Turbo nozzle (1x)

Brush (1x)

Foam sprayer (1x)

Screw (2x)

Warranty Certificate (1x)

Manual (1x)

• Open the packaging and take out the high pressure washer carefully.
• Remove the packaging material as well as the packaging and transport bracing (if available).
• Check that the delivery is complete.
• Check the high pressure washer and accessory parts for transport damage.
• If possible, store the packaging until the warranty period has expired.

⚠ Attention!

The high pressure washer and packaging materials are not toys!

Children must not be allowed to play with plastic bags, film and small parts! There is a risk of swallowing and suffocation!

IV. Intended use

The high pressure washer is designed to clean vehicles, machines, buildings, facades, etc. in private, domestic use.

The high pressure washer is to be used only for its prescribed purpose. Any other use is deemed to be a case of misuse. The user / operator and not the manufacturer will be liable for any damage or injuries of any kind caused as a result of this.

Please note that the high pressure washer has not been designed for use in commercial, trade or industrial applications. Our warranty will be voided if the high pressure washer is used in commercial, trade or industrial businesses or for equivalent purposes.

This high pressure washer is not allowed to be used by persons (including children) with reduced physical, sensory or mental capacities or those with a lack of experience and knowledge.

V. Safety regulations

General power tool safety warnings and personal safety

⚠ Caution! Read all safety regulations and instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

1. Work area safety

• Keep work area clean and well lit. Cluttered or dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
• Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

2. Electrical safety

• Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
• Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body

is earthed or grounded. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

• Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
• When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
• If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

3. Personal safety

• Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
• Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
• Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.
• Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
• Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
• Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
• If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can

reduce dustrelated hazards.

4. Power tool use and care

• Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
• Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
• Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
• Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
• Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool's operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
• Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.

Caution!

Residual risks

Even if you use this electric power tool in accordance with instructions, certain residual risks cannot be rules out. The following hazards may arise in connection with the equipment's construction and layout:

1. Lung damage if no suitable protective dust mask is used.
2. Damage to hearing if no suitable ear protection is used.
3. Health damage caused by hand-arm vibrations if the equipment is used over a prolonged period or is not properly guided and maintained.

5. Service

• Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

Electrical safety:

⚠ Caution: to avoid accidents and injuries from electric shocks:

- The plug and socket of an extension cable must be water-tight!

⚠️ Unsuitable extension cables can be dangerous as people can be harmed by an electric shock!

• Protect the electric plug connections against moisture.
• If there is a risk of flooding, fix the plug connections in an area that is safe from flooding.
• Ensure that the mains voltage matches the specifications on the rating plate.
• Connection to the mains must be carried out by an experienced electrician and meet the requirements of the Australian standards.

- The electrical installation shall be according to national wiring rules.

- The device must only be connected to a mains socket via a residual-current circuit breaker (RCD) with a rated leakage current of not more than 30 mA. Fuse: at least 13 ampere.

- Before each use, check the high pressure washer, cable and plug for damage.

- If the power cable for this high pressure washer is damaged, it must be replaced by the manufacturer, a customer service agent of the same or a similarly qualified person in order to prevent hazards.

- Do not pull the plug from the socket by the cable. Protect the cable from heat, oil and sharp edges.

• Do not carry or fix the high pressure washer by the cable.
• Use only extension cables that are protected from spray water and designed for outdoor use. Always fully unroll a cable drum before use. Check the cable for damage.
• Before any work on the high pressure washer, during work breaks and in the case of non-use, remove the plug from the socket.
• Wear sturdy footwear to protect against electric shock.
• To protect against electric shock, operate the high pressure washer only in an upright position.

High pressure washer safety warnings

Risk of unsafe operation

• Unsafe operation of your high pressure washer could lead to serious injury or death to you or others.
• The spray gun/wand is a powerful cleaning tool that could look like a toy to a child.
• Reactive force of spray results in gun/lance movement, potentially causing the operator to slip, fall or misdirect the spray. Improper control of gun/wand can result in injuries to self, others and property damage.
• Become familiar with the operation and controls of the high pressure washer.
• Keep children away from the high pressure washer at all times.
• Never modify or remove the safety features of this high pressure washer.
• Do not operate the high pressure washer with missing, broken or unauthorized parts.
• Never leave wand unattended while unit is running.
• Keep work area free of obstacles.
• Stand on stable surface and grip gun/lance firmly. Expect the gun to kick back when engaged

• Do not use flammable or explosive liquids such as gasoline, fuel oil, kerosene, -solvents or thinners. Pump should only be used with liquids compatible with water blaster component materials. Failure to follow to this warning can result in serious personal injury, death and/or property damage.

• Water high pressure washer must be located on a solid level surface. IF could tip or fall causing serious injury.
  ⚠ Warning! Do not use the appliance within range of persons unless they wear protective clothing.
  ⚠ Warning! High pressure jets can be dangerous if subject to misuse. The jet must not be directed at persons, live electrical equipment or the appliance itself.
  ⚠ Warning! Do not direct the jet against yourself or others in order to clean clothes or foot-wear.
  ⚠ Warning! To ensure appliance safety, use only original spare parts from the manufacturer or approved by the manufacturer.
  ⚠ Warning! High pressure hoses, fittings and couplings are important for the safety of the appliance. Use only hoses, fittings and couplings recommended by the manufacturer.
  ⚠ Warning! Do not use the appliance if a supply cord or important parts of the appliance are damaged, e.g. safety devices, high pressure hoses, trigger gun.

This high pressure washer is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge.

⚠ Warning! Water that has flowed through backflow preventer is considered to be non-potable.
• Children being supervised not to play with the appliance.
- High pressure washers shall not be used by children. Children should be supervised to ensure that they do not play with the high pressure washer.
⚠ Warning! Do not use appliance without reading the instruction sheet.
⚠ Warning! This high pressure washer has been designed for use with the cleaning agent supplied or recommended by the manufacturer. The use of other cleaning agents or chemicals may adversely affect the safety of the high pressure washer.
⚠ Warning! High pressure washers shall not be used by children or untrained personnel.
⚠ Warning! During use of high pressure cleaners, aerosols may be formed. Inhalation of aerosols can be hazardous to health
⚠ Warning! Inadequate extension cords can be dangerous. If an extension cord is used, it shall be suitable for outdoor use, and the connection has to be kept dry and off the ground. It is recommended, that this is accomplished by means of a cord reel

which keeps the socket at least 60 mm above the ground.

⚠ Warning! Ensure that any exhaust emissions are not in the vicinity of air intakes.
⚠ Warning! Always switch off the mains disconnecting switch when leaving the high pressure washer unattended.

VI. Technical data

Mains connection 230 - 240 V~ / 50 Hz
Power consumption 2400 W
Mains cable length approx. 5 m
Safety class II
Degree of protection IPX5
Rated/operating pressure 12 MPa
Max. permissible pressure 18 MPa / 2600 PSI
Max. inflow pressure 0.4 MPa
Inflow temperature 5 - 50 °C
Working flow rate, water	5.5 l/min
Max. working flow rate, water	6.8 l/min
Weight approx.	9 kg
Foam producer capacity	0.75 l

Noise and Vibration

Sound pressure level ( LpA )	78 dB(A)
Uncertainty KpA	3 dB(A)
Sound power level ( LWA ):	94 dB(A)
Vibration ( ah ).	< 2.5 m/s 2

Wear ear-muffs.

The impact of noise can cause damage to hearing.

Sound and vibration values were measured with a standardized test method.

The specified vibration value was established in accordance with a standardized testing method. It may change according to how the electric high pressure washer is used and may exceed the specified value in exceptional circumstances.

The specified vibration value can be used to compare the high pressure washer with other electric power tools.

The specified vibration value can be used for initial assessment of a harmful effect.

Keep the noise emissions and vibrations to a minimum:

• Only use appliances which are in perfect working order.
  • Service and clean the appliance regularly.
• Adapt your working style to suit the appliance.
• Do not overload the appliance.
• Have the appliance serviced whenever necessary.
• Switch the appliance off when it is not in use.
• Wear protective gloves.

VII. Assembly

⚠ Warning! Ensure the high pressure washer is correctly and completely assembled before use.

Mounting of the quick connector (Fig.2)

1 Remove the black cap from the back side of the high pressure washer.
2 Mount the quick connector (12) to the water inlet connection (9) at the back side of the high pressure washer.

Mounting of the handle with holder for high pressure hose (Fig.2)

1 Push the handle with holder for high pressure hose (1) onto the fastening points at the top of the high pressure washer.
2 Secure the handle with holder for high pressure hose (1) with the screws (19). Use for this a screwdriver (not included).

Mounting of the holder for mains cable and lance holder (Fig.2)

1 Attach the holder for mains cable (3) and the lance holder (6) onto the both

fastening points at the side of the high pressure washer.

Mounting of the high pressure hose (Fig.3)

1 Remove the black cap from connection for high pressure hose (5).
2 Connect the high pressure hose (2) with the connection for high pressure hose (5).

Mounting of the high pressure hose and the gun (Fig.4)

1 Plug the high pressure hose (2) into the gun (14).
2 For removal of the high pressure hose (2), push the lever (B) and pull out the high pressure hose (2).

Mounting of the extension and the accessories (Fig.4)

1 Plug the extension (13) into the gun (14) and twist it.
2 If you require the brush (18), plug it into the gun (14) instead of the extension (13) and twist it.
3 Plug the required accessory (10; 15; 16; 17) into the extension (13).
4 For removal, press the button (A) and remove the accessory.

VIII. Before operation

It is recommend for the power supply to this high pressure washer either to be connected via a residual current device circuit-breaker, which interrupts the power flow as soon as the leakage current to earth exceeds 30 mA for 30 ms, or for it to be equipped with an earth tester.

Before you connect the high pressure washer to the mains supply make sure that the data on the rating plate are identical to the mains data. Warning! Always pull the power plug before making adjustments to the high pressure washer

Using the high pressure washer correctly

- The high pressure washer must be stood on a level, stable surface.

- It is recommended that you adopt the correct operating position every time you use the high pressure washer with one hand on the gun and the other on the lance.

- Never direct the water jet at electrical lines or the high pressure washer itself.

- Never use the high pressure washer in potentially explosive areas under any circumstances!

- The operating temperature must be between +5 and + 50 °C.

- Do not cover or modify the lance or the spray nozzles in any way.

- The high pressure washer is designed to be used with cold or lukewarm water (max. 50 °C); higher temperatures can damage the high pressure washer.

- Do not use water that is dirty, gritty or contains any chemical products, as these could impair operation and shorten the life of the high pressure washer.

⚠ Warning! Risk of explosion Do not spray flammable liquids.

⚠ Warning! Water that has passed through the non-return valve is not drinkable.

⚠ Warning! If cleaning agent gets into contact with your skin or into your eye, rinse immediately with lots of clean water. Then consult a doctor or follow the steps described on the safety data sheet or provided by the manufacturer of the cleaning agent.

Water inlet connector (Fig. 1/2)

The quick connector (12) has a standard hose coupling system. Plug the hose coupling of the supply hose (min. ∅ 1/2"/13 mm) to the quick connector (12).

Always use a reinforced hose with a standard coupling for the water inlet. The hose should be at least 6 m in length (not supplied).

A backflow preventer must be installed between the drinking water and the high pressure washer! Ask your local plumber about this.

Electrical connections

• Before you connect the high pressure washer to the power supply make sure that the data on the rating plate are identical to the supply voltage.
• If you use any extension cables, make sure that they are suitable for outdoor use and have large enough wires:
  1 - 10 m: 1.5 mm ⁴
  10-30 m: 2.5 mm ⁴
• Insert the power plug on the power cable into the socket outlet.

IX. Operation

⚠ Warning! Be prepared for the recoil force of the emitted water jet! Ensure that you are standing firmly and that you are holding the gun (14) securely, otherwise you could injure yourself or other people.

Never operate the high pressure washer with a closed water tap. Dry running will damage the high pressure washer!

Using the gun (Fig.1/4)

1 Turn on the water tap entirely.
2 Switch on the high pressure washer with the On / off switch (4). Only ever switch on the high pressure washer once you have connected all of the water pipes and they do not leak. The motor switches on until the required pressure has built up. After the pressure has built up, the motor switches off.
3 Press the security switch (C) to unlock the gun starting lever (D). The nozzle operates by pressure and the motor switches back on.
4 Releasing the gun starting lever (D) causes the high pressure washer to switch off. The system remains pressurised.
5 After using the high pressure washer press the security switch (C) to lock the gun starting lever.

Usage of the accessories (Fig.4)

Foam sprayer (10): Fill the foam sprayer (10) with detergent. The width of the beam can be adjusted by turning the nozzle (F). By turning the knob (E), the foam volume can be adjusted.

Variable nozzle (15): This accessory is intended for ordinary cleaning works. The water jet can be adjusted by turning the variable nozzle (15).

Turbo nozzle (16): This accessory is intended for stubborn dirt.

90° Turbo nozzle (17): The 90° Turbo nozzle (17) can be used for cleaning gutters and car underbodies.

Brush (18): The brush (18) can be used for cleaning cars and large areas. This accessory operates in a low pressure mode.

After use

1. Disconnect the high pressure washer from water supply.
2. Empty the high pressure washer by using the gun for a few seconds.
3. Switch off the high pressure washer.
4. Disconnect the high pressure washer from power supply.
5. Let the high pressure washer cool down.
6. Check after each use if the high pressure washer is damaged.

X. Maintenance and cleaning

Pull out the power plug before every maintenance operation. This also includes connecting to the water supply or trying to eliminate leaks. There is a risk of electrocution or of injury from moving parts.

Cleaning

It is recommended to clean the high pressure washer after each use.

Never direct the water jet against the high pressure washer, nor clean the high pressure washer under flowing water. This could give rise to the danger of electric shock and damage the high pressure washer!

Always keep the high pressure washer clean. Do not use any detergents or solvents.

• Always keep the ventilation slots clean and free from dirt and dust.
- Only clean the high pressure washer with a soft brush or a slightly moist cloth.
- If nozzles are soiled or blocked, you can remove any foreign bodies in the nozzle using the nozzle cleaning needle (11).

Maintenance

The high pressure washer is maintenance free.

XI. Troubleshooting

Problem Possible Cause Action
The high pressure washer does not work.	No electrical voltage to the high pressure washer.	Check the fuse, power cable and power plug and have them replaced by qualified personnel if necessary.
	The cross section of the extension cable is not large enough and/or the extension cable is too long.	Use extension cables with larger cross sections and/or use shorter extension cables.
	The mains voltage is lower than that specified.	Contact the power supply company if necessary.
	The high pressure washer is frozen.	Check and thaw if necessary.
The motor starts but there is no pressure build-up.	Air intake in the water inlet.	Check the supply hose and hose connectors and replace if necessary.
	Water cock closed. Turn open the water cock.	Water cock.
The operating pressure is irregular.	Air intake in the water inlet.	Check the supply hose and hose connectors and replace if necessary.

XII. Storage

Storage (Fig.5)

• Clean up the high pressure washer before storing.
• Drain all the water from the high pressure washer.
• Disconnect the unit from the water supply.
• Store the gun (14) and extension (13) in the lance holder (6).
• Hook the mains cable onto the holder for mains cable (3).
• Protect the high pressure washer from dust.
• Ensure that children cannot reach the high pressure washer.
• Store the pressure washer and its accessories in a frost-free room.

- The high pressure hose (2) can be stored at the backside of the handle with holder for high pressure hose (1).

- The nozzle cleaning needle (11) and other accessories can be stored in the accessory holder (7).

- Protect the high pressure washer and its accessories from frost when they have not been completely drained of all water.

XIII. Disposal and recycling

The equipment is supplied in packaging to prevent it from being damaged in transit. The raw materials in this packaging can be reused or recycled. The equipment and its accessories are made of various types of material, such as metal and plastic. Never place defective equipment in your household refuse. The equipment should be taken to a suitable collection center for proper disposal.

If you do not know the whereabouts of such a collection point, you should ask in your local council offices.

ALDI

WORKZONE®

HIGH PRESSURE WASHER

Warranty Details

REGISTER YOUR PURCHASE AT www.aldi.com.au/en/about-aldi/product-registration/ TO KEEP UP-TO-DATE WITH IMPORTANT PRODUCT INFORMATION

The product is guaranteed to be free from defects in workmanship and parts for a period of 60 months from the date of purchase. Defects that occur within this warranty period, under normal use and care, will be repaired, replaced or refunded at our discretion.

The benefits conferred by this warranty are in addition to all rights and remedies in respect of the product that the consumer has under the Competition and Consumer Act 2010 and similar state and territory laws.

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

ALDI

WORKZONE®

HIGH PRESSURE WASHER

Repair and Refurbished Goods or Parts Notice

Unfortunately, from time to time, faulty products are manufactured which need to be returned to the Supplier for repair.

Please be aware that if your product is capable of retaining user-generated data (such as files stored on a computer hard drive, telephone numbers stored on a mobile telephone, songs stored on a portable media player, games saved on a games console or files stored on a USB memory stick) during the process of repair, some or all of your stored data may be lost.

We recommend you save this data elsewhere prior to sending the product for repair.

You should also be aware that rather than repairing goods, we may replace them with refurbished goods of the same type or use refurbished parts in the repair process.

Please be assured though, refurbished parts or replacements are only used where they meet ALDI's stringent quality specifications.

If at any time you feel your repair is being handled unsatisfactorily, you may escalate your complaint. Please telephone us on 1300 855 831 or write to us at:

RossMac Pty. Ltd.

P.O. Box 261, Essendon North, Victoria, 3041

1300 855 831

[e-mail]