MX95 - Network card CISCO - Free user manual and instructions
Find the device manual for free MX95 CISCO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Interface Card |
| Brand | Cisco |
| Model | MX95 |
| Form Factor | PCI Express 3.0 x8 |
| Ports | 2 x 10GbE SFP+ |
| Data Rate | 20 Gbps full duplex |
| Supported Standards | IEEE 802.3ae, IEEE 802.3x |
| OS Support | Windows, Linux, VMware |
| Dimensions (L x H) | 167.64 x 68.91 mm |
| Weight | 0.3 kg |
| Power Consumption | 15W typical |
| Operating Temperature | 0°C to 55°C |
| Storage Temperature | -40°C to 70°C |
| LED Indicators | Link/Activity per port |
| Advanced Features | Jumbo frames, VLAN tagging, TCP offloading |
| Safety Compliance | FCC, CE, RoHS |
| Warranty | Limited lifetime warranty |
Frequently Asked Questions - MX95 CISCO
How do I install the Cisco MX95 network card?
To install the Cisco MX95, power off your computer, open the case, insert the card into an available PCI Express slot, secure it, and close the case. Then, install the appropriate drivers from Cisco's website.
What operating systems are supported?
The MX95 supports Windows, Linux, and VMware operating systems. Drivers for each are available on the Cisco support site.
Can I use the MX95 with a fiber optic cable?
Yes, the MX95 has SFP+ ports compatible with 10 Gigabit Ethernet fiber modules. Use appropriate modules and fiber cables for your network.
How do I check if the card is working correctly?
After installation, check the LED indicators on the card. A solid green light indicates a link, and blinking shows activity. Also, verify in the operating system's network settings that the adapter is recognized.
What is the maximum data transfer rate?
The card supports 20 Gbps full duplex, combining both ports for aggregate throughput, or 10 Gbps per port.
Does the MX95 support jumbo frames?
Yes, it supports jumbo frames up to 9000 bytes, which can improve performance for large data transfers.
How do I update the firmware?
Firmware updates are available on the Cisco website. Download the latest firmware, then use the Cisco update utility or follow instructions in the manual to flash the card.
The card is not detected. What should I do?
Ensure the card is fully seated in the PCIe slot. Check that the power supply is adequate (the card draws up to 15W). Also, try a different slot or update the motherboard BIOS.
Can I use the MX95 in a virtualized environment?
Yes, the MX95 is supported in VMware environments. Enable passthrough in the hypervisor for direct access to the card's resources.
What is the warranty period?
Cisco offers a limited lifetime warranty for the MX95 network card. Registration is required; see the warranty documentation for details.
User questions about MX95 CISCO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network card in PDF format for free! Find your manual MX95 - CISCO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MX95 by CISCO.
USER MANUAL MX95 CISCO
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : CISCO
Model : MX95
Category : Network card