79526 - Grinder Tolsen - Free user manual and instructions
Find the device manual for free 79526 Tolsen in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Angle Grinder |
| Model | 79526 |
| Brand | Tolsen |
| Disc Diameter | 125 mm (5 in) |
| Power Input | 1100 W |
| No-Load Speed | 11000 rpm |
| Spindle Thread | M14 |
| Weight | 2.4 kg (5.3 lb) |
| Dimensions (LxWxH) | 295 x 120 x 105 mm |
| Power Supply | 230 V ~ 50 Hz |
| Input Current | 4.8 A |
| Protection Class | Class II (Double Insulated) |
| Main Functions | Cutting, grinding, polishing, wire brushing |
| Maintenance | Regularly clean ventilation slots; replace carbon brushes when worn |
| Safety Features | Overload protection, soft start, side handle, guard |
| Spindle Lock | Yes |
| Spare Parts Available | Carbon brushes, guard, side handle, switch |
| Reparability | User replaceable carbon brushes and switch |
| Warranty | 2 years |
| Included Accessories | Auxiliary handle, grinding disc, wrench |
Frequently Asked Questions - 79526 Tolsen
What type of disc can I use with this grinder?
This grinder accepts 125 mm (5 in) discs with a 22.2 mm bore. Common types include grinding discs, cutting discs, flap discs, and wire brushes.
Is this grinder suitable for cutting metal?
Yes, with a suitable cutting disc, it can cut metal, tile, and masonry. Always use the appropriate guard for each application.
How do I change the disc?
Press the spindle lock button and turn the disc until it locks. Use the included wrench to loosen the flange nut. Replace the disc, then tighten the nut securely.
Can I use this grinder for polishing?
Yes, attach a polishing pad or felt wheel. Reduce speed if possible and apply light pressure to avoid damaging the surface.
What maintenance does this grinder require?
Regularly clean the air vents from dust. Replace carbon brushes when they are shorter than 5 mm. Periodically check the guard and side handle for tightness.
Is the grinder overload protected?
Yes, it features automatic overload protection that shuts off the motor if it overheats or draws too much current. Allow it to cool before restarting.
What safety precautions should I take?
Always wear safety goggles, gloves, and ear protection. Keep your hands away from the rotating disc. Never remove the guard. Disconnect power before changing accessories.
Can I use the grinder with a variable speed controller?
Only use the original speed control if equipped. This model has a fixed no-load speed of 11000 rpm. Using an external speed controller may damage the motor.
Where can I find spare parts?
Spare parts such as carbon brushes, side handles, and guards are available from Tolsen service centers or authorized dealers. Use the model number 79526 when ordering.
What does the spindle lock do?
The spindle lock prevents the spindle from rotating while you loosen or tighten the flange nut, making disc changes easier and safer.
User questions about 79526 Tolsen
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Grinder in PDF format for free! Find your manual 79526 - Tolsen and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 79526 by Tolsen.
USER MANUAL 79526 Tolsen
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Tolsen
Model : 79526
Category : Grinder