KAMHPDRY10A - Tumble dryer Kogan - Free user manual and instructions
Find the device manual for free KAMHPDRY10A Kogan in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Tumble Dryer |
| Brand | Kogan |
| Model | KAMHPDRY10A |
| Capacity | 10 kg |
| Drying System | Heat Pump |
| Energy Efficiency Class | A++ |
| Dimensions (W x H x D) | 600 x 850 x 600 mm |
| Weight | 45 kg |
| Power Supply | 230 V, 50 Hz |
| Power Consumption | 2.5 kWh per cycle |
| Noise Level | 65 dB(A) |
| Number of Programs | 15 |
| Programs | Cotton, Synthetics, Delicates, Wool, Quick 40 min, etc. |
| Delay Start | Up to 24 hours |
| Child Lock | Yes |
| Reverse Tumbling | Yes |
| Condenser Cleaning | Manual clean every 10 cycles |
| Lint Filter Cleaning | After each cycle |
| Water Tank Capacity | 5 L |
| Spare Parts Availability | Filters, belts, heating elements, sensors |
| Repairability Index | 7.5 / 10 |
Frequently Asked Questions - KAMHPDRY10A Kogan
How do I clean the lint filter?
Open the dryer door and pull out the lint filter. Remove lint by hand or with a soft brush. Rinse under running water if needed, then dry thoroughly before reinserting. Perform this after every cycle to maintain optimal airflow.
Why is my dryer not heating?
Check if the lint filter is clean. Ensure the condenser (if heat pump) is not blocked. Verify the power supply and that the door is fully closed. If the issue persists, the heating element or thermostat may need replacement.
Can I dry woolens in this dryer?
Yes, use the Wool program with low heat. Do not overdry; remove items while still slightly damp. Always check garment care labels first.
How often should I clean the condenser?
Clean the condenser every 10 drying cycles or when the clean condenser indicator lights up. Refer to the manual for removal and cleaning instructions.
What does the child lock do?
The child lock prevents accidental button presses during operation. Activate by holding the Child Lock button for 3 seconds. Deactivate the same way.
How do I use the delay start function?
Select a drying program, then press the Delay Start button repeatedly to set the desired delay (1-24 hours). The dryer will start automatically after the delay.
Why does my dryer take longer than usual?
Possible causes: overloaded drum, clogged lint filter or condenser, low room temperature, or high moisture in clothes. Ensure proper loading and maintenance.
Can I install a venting kit for this dryer?
This model is a heat pump dryer and does not require external venting. It condenses moisture into a tank. If you need to drain continuously, a drain hose can be connected (sold separately).
What is the maximum load for each program?
The maximum load is 10 kg for cotton programs. For synthetics and delicates, reduce to 5 kg and 2.5 kg respectively. Overloading reduces drying efficiency.
How do I reset the dryer?
Unplug the dryer, wait 5 minutes, then plug it back in. If the issue persists, press and hold the Start/Pause button for 10 seconds to reset the control board.
User questions about KAMHPDRY10A Kogan
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Tumble dryer in PDF format for free! Find your manual KAMHPDRY10A - Kogan and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KAMHPDRY10A by Kogan.
USER MANUAL KAMHPDRY10A Kogan
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Kogan
Model : KAMHPDRY10A
Category : Tumble dryer