SNC-EM601 - Surveillance Camera SONY - Free user manual and instructions
Find the device manual for free SNC-EM601 SONY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Surveillance Camera |
| Brand | Sony |
| Model | SNC-EM601 |
| Image Sensor | 1/3-inch CMOS |
| Resolution | 2 Megapixels (1920 x 1080) |
| Frame Rate | 30 fps at 1080p |
| Lens | Fixed focal length, 2.8 mm |
| Day/Night | Yes, with IR-cut filter |
| Minimum Illumination | 0.5 lux (color), 0 lux (IR on) |
| Night Vision | Up to 20 meters |
| Compression | H.264, JPEG |
| Network Interface | 10/100 BASE-T Ethernet |
| Protocols | IPv4, IPv6, TCP, UDP, HTTP, HTTPS, RTP, RTSP, SNMP |
| Alarm Input/Output | 1 input / 1 output |
| Audio | Built-in microphone, external speaker support |
| Power Supply | PoE (IEEE 802.3af) or DC 12V |
| Power Consumption | Max 8 W |
| Dimensions (W x H x D) | 70 mm x 60 mm x 50 mm |
| Weight | 200 g |
| Ingress Protection | IP66 |
| Operating Temperature | -10°C to 50°C |
| Storage Temperature | -20°C to 60°C |
| Mounting | Wall or ceiling mount |
| Accessories Included | Mounting bracket, screws, manual |
| Maintenance | Clean lens with dry cloth; keep vents clear |
| Security | Password protection, IP filtering, HTTPS encryption |
Frequently Asked Questions - SNC-EM601 SONY
How do I reset the Sony SNC-EM601 to factory defaults?
Press and hold the reset button on the camera for 10 seconds using a paperclip. The camera will reboot with default settings.
What is the default IP address of the SNC-EM601?
The default IP is 192.168.0.100. Use the Sony SNC Tool or your router's DHCP list to find it.
Can I access the camera remotely?
Yes, enable UPnP or manually forward ports (default HTTP 80, RTSP 554) in your router. Use a dynamic DNS service.
How do I set up motion detection?
Log in to the camera's web interface, go to Motion Detection settings, enable it, and draw detection zones. Adjust sensitivity.
What recording options are available?
The camera supports SD card recording (up to 128GB), NAS via FTP/SMB, and continuous or event-based recording.
Is the camera compatible with third-party NVRs?
Yes, it supports RTSP and ONVIF Profile S. Add it to your NVR using IP, port, and credentials.
How do I update the firmware?
Download the latest firmware from Sony's support site. In the web interface, go to System > Maintenance and upload the file.
The camera is not showing any image. What should I do?
Check power (PoE or DC), network cable, and try accessing via the SNC Tool. Reset if necessary.
Can I use the camera outdoors?
Yes, it has an IP66 rating, meaning it is dust-tight and protected against heavy rain.
How do I clean the camera safely?
Use a soft, dry cloth to clean the housing. For the lens, use a lens cleaning pen or microfiber cloth. Avoid liquids.
User questions about SNC-EM601 SONY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Surveillance Camera in PDF format for free! Find your manual SNC-EM601 - SONY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SNC-EM601 by SONY.
USER MANUAL SNC-EM601 SONY
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SONY
Model : SNC-EM601
Category : Surveillance Camera