UVonix Blackstar - Lighting Blizzard - Free user manual and instructions
Find the device manual for free UVonix Blackstar Blizzard in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Lighting Fixture |
| Dimensions (W x D x H) | 12 x 10 x 8 inches (305 x 254 x 203 mm) |
| Weight | 5.5 lbs (2.5 kg) |
| Power Consumption | 100W |
| Input Voltage | AC 100-240V, 50/60Hz |
| Light Source | 1 x 100W Cool White LED |
| Color Temperature | 6000K |
| Beam Angle | 25 degrees |
| DMX Channels | 2 (Dimmer, Strobe) |
| Control Protocol | DMX512 |
| Operating Modes | DMX, Master/Slave, Standalone |
| Strobe Rate | 0-20 Hz |
| Dimmer | 0-100% smooth dimming |
| IP Rating | IP20 (indoor use only) |
| Cooling | Passive convection (fanless) |
| Housing Material | Aluminum alloy |
| Mounting Options | Floor stand, truss clamp (optional) |
| Recommended Maintenance | Clean lens with soft cloth; check cables periodically |
| Safety Certifications | CE, RoHS |
| Spare Parts Available | LED module, power supply, control board (contact support) |
Frequently Asked Questions - UVonix Blackstar Blizzard
How do I connect the UVonix Blackstar to a DMX controller?
Use a standard 3-pin XLR cable to connect the DMX IN port on the fixture to the DMX OUT of your controller. Set the DMX address via the DIP switches or menu. Refer to the DMX Addressing section.
What is the power consumption of this fixture?
The UVonix Blackstar consumes approximately 100W at full output. Ensure your power source can handle the total load if connecting multiple units.
Can I use this light outdoors?
No, this fixture has an IP20 rating, meaning it is designed for indoor use only. Exposure to moisture or dust may damage the unit.
How do I clean the lens?
Use a soft, lint-free cloth slightly dampened with water or a mild glass cleaner. Avoid abrasive materials. Ensure the unit is unplugged and cooled down before cleaning.
The light does not turn on. What should I check?
First, verify the power cable is securely connected and the outlet is live. Check the fuse (if accessible) and ensure the DMX address is not conflicting. Also, confirm the fixture is not in standby mode.
How do I set the DMX address?
Use the menu buttons on the rear panel to navigate to 'DMX Address'. Enter the desired address (001-512) and press Enter. Alternatively, older models may use DIP switches – set them according to the binary value.
What is the maximum ambient temperature for safe operation?
The recommended ambient temperature range is 0°C to 40°C (32°F to 104°F). Do not operate in enclosed spaces without proper ventilation.
Can I replace the LED module myself?
LED replacement should be performed by qualified technicians. Contact Blizzard support for spare parts and service instructions. Opening the unit may void warranty.
How do I link multiple units in Master/Slave mode?
Set one unit as Master (DMX mode with no controller) and others as Slave. Connect DMX OUT of Master to DMX IN of the first Slave, then daisy-chain. The slaves will replicate the master's output.
What does the strobe effect rate mean?
The strobe function allows you to create flashing effects from 0 Hz (off) to 20 Hz (20 flashes per second). Adjust via DMX or onboard menu.
User questions about UVonix Blackstar Blizzard
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual UVonix Blackstar - Blizzard and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. UVonix Blackstar by Blizzard.
USER MANUAL UVonix Blackstar Blizzard
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Blizzard
Model : UVonix Blackstar
Category : Lighting