EX42000 - Switch EtherWAN - Free user manual and instructions
Find the device manual for free EX42000 EtherWAN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Managed Ethernet Switch |
| Brand | EtherWAN |
| Model | EX42000 |
| Dimensions | 440 x 200 x 44 mm (1U) |
| Weight | 2.5 kg |
| Power Supply | 100-240V AC, 50-60 Hz, internal power supply |
| Power Consumption | 30W (max) |
| Number of Ports | 24 x 10/100/1000Base-T + 4 x SFP+ |
| Switching Capacity | 128 Gbps |
| Management Features | VLAN, QoS, STP, IGMP snooping, SNMP, CLI, Web GUI |
| Mounting | 19-inch rack mountable |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 70°C |
| Humidity | 10% to 90% non-condensing |
| Safety Compliance | CE, FCC Class A |
| Maintenance | Clean with a dry, soft cloth. Do not use liquids or solvents. |
| Spare Parts & Repairability | No user-serviceable parts inside. Refer to qualified service personnel for repairs. |
| General Information | Industrial-grade switch suitable for enterprise networks. For detailed setup, refer to the user manual. |
Frequently Asked Questions - EX42000 EtherWAN
How do I reset the EX42000 to factory defaults?
Press and hold the reset button (located on the front panel) for 10 seconds while the device is powered on. The device will reboot with factory settings.
What is the default IP address and login credentials?
The default IP address is 192.168.1.1. The default username is admin and password is admin. For security, change these on first login.
Can I power the switch via PoE?
No, the EX42000 does not support Power over Ethernet (PoE). It requires a standard AC power connection.
How many VLANs does the switch support?
The switch supports up to 256 VLANs (802.1Q). You can configure them via the web interface or CLI.
Does the switch support link aggregation?
Yes, it supports IEEE 802.3ad Link Aggregation (LACP) for up to 8 groups per switch.
What should I do if the switch is not powering on?
Check the power cable and outlet. Ensure the power supply input voltage matches your local mains. If the issue persists, contact technical support.
How do I update the firmware?
Download the latest firmware from the EtherWAN website. Access the web GUI, go to Maintenance > Firmware Upgrade, and upload the file. Do not power off during the update.
What is the maximum cable length for Ethernet ports?
For 10/100/1000Base-T, the maximum cable length is 100 meters (328 feet) using Cat5e or better cable.
Can I mount the switch on a wall?
The EX42000 is designed for 19-inch rack mounting. Wall mounting is not recommended due to ventilation and stability concerns.
How do I configure a trunk port?
Access the VLAN configuration in the web GUI or CLI. Set the port to trunk mode and specify which VLANs are allowed. Use the command switchport mode trunk in CLI.
User questions about EX42000 EtherWAN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual EX42000 - EtherWAN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EX42000 by EtherWAN.
USER MANUAL EX42000 EtherWAN
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : EtherWAN
Model : EX42000
Category : Switch